All MIBs › RAISECOM-ELPS-MIB › rcElpsWtrTimer
rcElpsWtrTimer
Module: RAISECOM-ELPS-MIB
OID (symbolic): RAISECOM-ELPS-MIB::rcElpsWtrTimer
OID (numeric): 1.3.6.1.4.1.8886.6.1.54.1.2.1.14
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: In revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become fault-free. After the failed working transport entity meets this criterion, a fixed period of time shall elapse before a normal traffic signal uses it again. This period, called wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps between 5 and 12 minutes; the default value is 5 minutes.
What is rcElpsWtrTimer?
Sets the wait-to-restore period, in minutes (5 to 12, default 5), that a failed working transport entity must remain fault-free before revertive-mode traffic switches back to it, preventing the protection group from flapping back and forth on an intermittent fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.14 snmpwalk -v2c -c public <target> RAISECOM-ELPS-MIB::rcElpsWtrTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.14.1 snmpget -v2c -c public <target> RAISECOM-ELPS-MIB::rcElpsWtrTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.14.1 i <value>
Start monitoring Raisecom metro/carrier Ethernet switch, media converter/access device (ITU-T G.8031 linear protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-ELPS-MIB::rcElpsWtrTimer OID value, configure state conditions and alerts, and monitor any Raisecom metro/carrier Ethernet switch, media converter/access device (ITU-T G.8031 linear protection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.54 | rcElps | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1 | rcElpsBaseGroup | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2 | rcElpsCfgTable | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2.1 | rcElpsCfgEntry | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2.1.14 | rcElpsWtrTimer | RAISECOM-ELPS-MIB |