All MIBs › RAISECOM-ELPS-MIB › rcElpsHoldOffTimer
rcElpsHoldOffTimer
Module: RAISECOM-ELPS-MIB
OID (symbolic): RAISECOM-ELPS-MIB::rcElpsHoldOffTimer
OID (numeric): 1.3.6.1.4.1.8886.6.1.54.1.2.1.15
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: When a new defect or more severe defect occurs (new SF), this event will not be reported immediately to protection switching if the provisioned holdoff timer value is non-zero. Instead, the holdoff timer will be started. When the holdoff timer expires, whether a defect still exists on the trail that started the timer will be checked. If one does exist, that defect will be reported to protection switching. Each protection group should have a provisionable holdoff timer. The suggested range of the holdoff timer is 0 to 10 seconds in steps of 100 ms with an accuracy of ��5 ms.
What is rcElpsHoldOffTimer?
Sets the holdoff timer (suggested range 0-10 seconds in 100ms steps, default 0) that delays reporting a new or worsening defect to protection switching until the timer expires and the defect is confirmed still present, preventing a protection switch from being triggered by a transient blip.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.15 snmpwalk -v2c -c public <target> RAISECOM-ELPS-MIB::rcElpsHoldOffTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.15.1 snmpget -v2c -c public <target> RAISECOM-ELPS-MIB::rcElpsHoldOffTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.54.1.2.1.15.1 i <value>
Start monitoring Raisecom metro/carrier Ethernet switch, media converter/access device (ITU-T G.8031 linear protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-ELPS-MIB::rcElpsHoldOffTimer OID value, configure state conditions and alerts, and monitor any Raisecom metro/carrier Ethernet switch, media converter/access device (ITU-T G.8031 linear protection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.54 | rcElps | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1 | rcElpsBaseGroup | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2 | rcElpsCfgTable | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2.1 | rcElpsCfgEntry | RAISECOM-ELPS-MIB |
| 1.3.6.1.4.1.8886.6.1.54.1.2.1.15 | rcElpsHoldOffTimer | RAISECOM-ELPS-MIB |