All MIBs › RADLAN-QCN-MIB › rlQcnIfStateCpCreationEn
rlQcnIfStateCpCreationEn
Module: RADLAN-QCN-MIB
OID (symbolic): RADLAN-QCN-MIB::rlQcnIfStateCpCreationEn
OID (numeric): 1.3.6.1.4.1.89.202.3.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Congestion point creation enable status. If CP creation is enabled for an interface, the system automatically creates a Congestion Point (CP) for a queue of that interface if at least one QCN priority (Oper state) is mapped to that queue.
What is rlQcnIfStateCpCreationEn?
This per-interface flag controls whether the switch automatically creates a QCN Congestion Point (CP) for a queue on that interface. When enabled, the system auto-creates a CP for any queue that has at least one operationally-enabled QCN priority mapped to it, so QCN feedback can flow without manual CP setup. For example, enabling rlQcnIfStateCpCreationEn on an interface causes a CP to be auto-created on its egress queue once a QCN priority becomes operational there.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.202.3.1.2 snmpwalk -v2c -c public <target> RADLAN-QCN-MIB::rlQcnIfStateCpCreationEn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.202.3.1.2.1 snmpget -v2c -c public <target> RADLAN-QCN-MIB::rlQcnIfStateCpCreationEn.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.202.3.1.2.1 s <value>
Start monitoring data-center switches with DCB/802.1Qau support, Marvell/RADLAN-based switch silicon (Quantized Congestion Notification) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-QCN-MIB::rlQcnIfStateCpCreationEn OID value, configure state conditions and alerts, and monitor any data-center switches with DCB/802.1Qau support, Marvell/RADLAN-based switch silicon (Quantized Congestion Notification) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.202 | rlQcnMib | Dell-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.202.3 | rlQcnIfStateTable | RADLAN-QCN-MIB |
| 1.3.6.1.4.1.89.202.3.1 | rlQcnIfStateEntry | RADLAN-QCN-MIB |
| 1.3.6.1.4.1.89.202.3.1.2 | rlQcnIfStateCpCreationEn | RADLAN-QCN-MIB |