QOS-COS-MIB :: agentCosQueueMgmtTypeIntf

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QOS-COS-MIB › agentCosQueueMgmtTypeIntf

agentCosQueueMgmtTypeIntf

Module: QOS-COS-MIB

OID (symbolic): QOS-COS-MIB::agentCosQueueMgmtTypeIntf

OID (numeric): 1.3.6.1.4.1.7244.2.3.3.2.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The management technique used for all queues on this interface. If taildrop(1), then all new packets presented to the queues are dropped based on some maximum threshold value(s). If wred(2), then an active queue management scheme is employed whereby packet drop precedence is considered during times of queue congestion using WRED parameters. The necessary queue management parameters are specified in the agentCosQueueMgmtTable for the corresponding agentCosQueueIntfIndex value. The default for this object is taildrop(1).

Implementations that support this object but do not support weighted RED must return taildrop(1) for this value and must not allow a value of wred(2) to be set.

What is agentCosQueueMgmtTypeIntf?

Deprecated read-write selector for whether all queues on this interface use taildrop(1) or wred(2) congestion management, defaulting to taildrop(1); superseded by the per-queue agentCosQueueMgmtType object and kept only for backward compatibility.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.3.1.3
snmpwalk -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtTypeIntf

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.3.1.3.1
snmpget -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtTypeIntf.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7244.2.3.3.2.3.1.3.1 i <value>

Start monitoring Quanta Computer Ethernet switch (Class of Service queueing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS-COS-MIB::agentCosQueueMgmtTypeIntf OID value, configure state conditions and alerts, and monitor any Quanta Computer Ethernet switch (Class of Service queueing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7244quantaQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2switchQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2.3qosQOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7244.2.3.3cosQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2agentCosQueueCfgGroupQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.3agentCosQueueControlTableQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.3.1agentCosQueueControlEntryQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.3.1.3agentCosQueueMgmtTypeIntfQOS-COS-MIB