QOS-COS-MIB :: agentCosQueueMgmtType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QOS-COS-MIB › agentCosQueueMgmtType

agentCosQueueMgmtType

Module: QOS-COS-MIB

OID (symbolic): QOS-COS-MIB::agentCosQueueMgmtType

OID (numeric): 1.3.6.1.4.1.7244.2.3.3.2.4.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The queue depth management technique used when per-queue specification is supported. If taildrop(1), then all new packets presented to the queue are dropped based on some maximum threshold value(s). If wred(2), then an active queue management scheme is employed whereby packet drop precedence is considered during times of queue congestion using WRED parameters. The necessary queue management parameters are specified in the agentCosQueueMgmtEntry for the corresponding agentCosQueueIntfIndex and agentCosQueueIndex values. The default for this object is taildrop(1).

Implementations that do not support weighted RED must return taildrop(1) for this value and must not allow a value of wred(2) to be set.

What is agentCosQueueMgmtType?

Per-queue congestion-management technique: taildrop(1), the default, simply drops new packets once a threshold is exceeded, while wred(2) drops packets probabilistically as the queue fills, using the parameters in agentCosQueueMgmtTable; devices without WRED support must always report taildrop(1) here.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.4.1.5
snmpwalk -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.4.1.5.1
snmpget -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7244.2.3.3.2.4.1.5.1 i <value>

Start monitoring Quanta Computer Ethernet switch (Class of Service queueing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS-COS-MIB::agentCosQueueMgmtType OID value, configure state conditions and alerts, and monitor any Quanta Computer Ethernet switch (Class of Service queueing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7244quantaQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2switchQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2.3qosQOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7244.2.3.3cosQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2agentCosQueueCfgGroupQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.4agentCosQueueTableQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.4.1agentCosQueueEntryQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.4.1.5agentCosQueueMgmtTypeQOS-COS-MIB