All MIBs › QOS-COS-MIB › agentCosQueueMgmtTailDropThreshold
agentCosQueueMgmtTailDropThreshold
Module: QOS-COS-MIB
OID (symbolic): QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold
OID (numeric): 1.3.6.1.4.1.7244.2.3.3.2.5.1.2
Node type: OBJECT-TYPE
Type: Sixteenths
Access: read-write
Description: Tail drop queue threshold above which all packets are dropped for the current drop precedence level. The value specifies the threshold based on a fraction of the overall device queue size in terms of sixteenths (0/16, 1/16, 2/16, ... 16/16). Since device implementations vary, the actual value deployed may be rounded up or down accordingly.
The default value is calculated from the agentCosQueueIndex and agentCosQueueDropPrecIndex as shown in the following table (values listed for drop precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12
This object is only used when agentCosQueueMgmtType is set to taildrop(1).
What is agentCosQueueMgmtTailDropThreshold?
Obsolete tail-drop threshold for this queue and drop-precedence level, expressed in sixteenths of the device's overall queue size (e.g. 16/16 = full); only took effect when agentCosQueueMgmtType was set to taildrop(1), and has been replaced by the percentage-based agentCosQueueMgmtPercentTailDropThreshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.2 snmpwalk -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.2.1 snmpget -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.2.1 s <value>
Start monitoring Quanta Computer Ethernet switch (Class of Service queueing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold OID value, configure state conditions and alerts, and monitor any Quanta Computer Ethernet switch (Class of Service queueing) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7244 | quanta | QUANTA-SWITCH-MIB |
| 1.3.6.1.4.1.7244.2 | switch | QUANTA-SWITCH-MIB |
| 1.3.6.1.4.1.7244.2.3 | qos | QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7244.2.3.3 | cos | QOS-COS-MIB |
| 1.3.6.1.4.1.7244.2.3.3.2 | agentCosQueueCfgGroup | QOS-COS-MIB |
| 1.3.6.1.4.1.7244.2.3.3.2.5 | agentCosQueueMgmtTable | QOS-COS-MIB |
| 1.3.6.1.4.1.7244.2.3.3.2.5.1 | agentCosQueueMgmtEntry | QOS-COS-MIB |
| 1.3.6.1.4.1.7244.2.3.3.2.5.1.2 | agentCosQueueMgmtTailDropThreshold | QOS-COS-MIB |