QOS-COS-MIB :: agentCosQueueMgmtPercentWredMinThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QOS-COS-MIB › agentCosQueueMgmtPercentWredMinThreshold

agentCosQueueMgmtPercentWredMinThreshold

Module: QOS-COS-MIB

OID (symbolic): QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold

OID (numeric): 1.3.6.1.4.1.7244.2.3.3.2.5.1.7

Node type: OBJECT-TYPE

Type: Percent

Access: read-write

Description: Weighted RED minimum queue threshold, below which no packets are dropped for the current drop precedence level. The value specifies the threshold based on a percentage of the overall device queue size. Since device implementations vary, the actual value deployed may be rounded up or down accordingly.

The default value, for all queues, is 100% for non-TCP traffic, 40%, 30% and 20% for TCP drop precedences 1, 2 and 3.

This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or less than the value of agentCosQueueMgmtPercentWredMaxThreshold.

What is agentCosQueueMgmtPercentWredMinThreshold?

Current percentage-based WRED minimum threshold for this queue and drop-precedence level, below which no packets are dropped; defaults to 100% for non-TCP traffic but 40/30/20% for TCP at drop precedences 1/2/3, and only applies when agentCosQueueMgmtType is wred(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.7
snmpwalk -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.7.1
snmpget -v2c -c public <target> QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7244.2.3.3.2.5.1.7.1 s <value>

Start monitoring Quanta Computer Ethernet switch (Class of Service queueing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold OID value, configure state conditions and alerts, and monitor any Quanta Computer Ethernet switch (Class of Service queueing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7244quantaQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2switchQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2.3qosQOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7244.2.3.3cosQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2agentCosQueueCfgGroupQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.5agentCosQueueMgmtTableQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.5.1agentCosQueueMgmtEntryQOS-COS-MIB
1.3.6.1.4.1.7244.2.3.3.2.5.1.7agentCosQueueMgmtPercentWredMinThresholdQOS-COS-MIB