All MIBs › Q-BRIDGE-MIB › dot1qVlanStaticUntaggedPorts
dot1qVlanStaticUntaggedPorts
Module: Q-BRIDGE-MIB
OID (symbolic): Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts
OID (numeric): 1.3.6.1.2.1.17.7.1.4.3.1.4
Node type: OBJECT-TYPE
Type: PortList
Access: read-create
Description:
The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
What is dot1qVlanStaticUntaggedPorts?
This is a byte string listing ports that should strip VLAN tags before forwarding frames, which operators can change. Network engineers set this to identify which ports connect to devices that don't understand VLAN headers. On the default VLAN, all ports are typically untagged unless the switch supports other configurations.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.17 | dot1dBridge | BRIDGE-MIB |
| 1.3.6.1.2.1.17.7 | qBridgeMIB | Q-BRIDGE-MIB |
| 1.3.6.1.2.1.17.7.1 | qBridgeMIBObjects | Q-BRIDGE-MIB |
| 1.3.6.1.2.1.17.7.1.4 | dot1qVlan | Q-BRIDGE-MIB |
| 1.3.6.1.2.1.17.7.1.4.3 | dot1qVlanStaticTable | Q-BRIDGE-MIB |
| 1.3.6.1.2.1.17.7.1.4.3.1 | dot1qVlanStaticEntry | Q-BRIDGE-MIB |
| 1.3.6.1.2.1.17.7.1.4.3.1.4 | dot1qVlanStaticUntaggedPorts | Q-BRIDGE-MIB |