All MIBs › PRVT-PW-TDM-MIB › prvtPwVcTDMCfgPayloadSize
prvtPwVcTDMCfgPayloadSize
Module: PRVT-PW-TDM-MIB
OID (symbolic): PRVT-PW-TDM-MIB::prvtPwVcTDMCfgPayloadSize
OID (numeric): 1.3.6.1.4.1.738.1.5.200.2.1.3.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The value of this object indicates the PayLoad Size to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of data. Upon RX, When the LEN field is set to 0, the payload of packet MUST assume this size, and if the actual packet size is inconsistent with this length, the packet MUST be considered to be malformed.
What is prvtPwVcTDMCfgPayloadSize?
Sets the TDM payload size, in bytes, that this pseudowire configuration uses when packing frames for transmission; on receipt a packet whose length doesn't match this configured size (when the LEN field is 0) is treated as malformed. Admins tune this value to trade off packetization delay against per-packet overhead for the TDM circuit.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.5.200 | prvtPwVc | PRVT-PW-TDM-MIB |
| 1.3.6.1.4.1.738.1.5.200.2 | prvtPwVcTDMMIB | PRVT-PW-TDM-MIB |
| 1.3.6.1.4.1.738.1.5.200.2.1 | prvtPwVcTDMObjects | PRVT-PW-TDM-MIB |
| 1.3.6.1.4.1.738.1.5.200.2.1.3 | prvtPwVcTDMCfgTable | PRVT-PW-TDM-MIB |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1 | prvtPwVcTDMCfgEntry | PRVT-PW-TDM-MIB |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.1 | prvtPwVcTDMCfgPayloadSize | PRVT-PW-TDM-MIB |