All MIBs › PRVT-NETWORK-LOOPBACK-TEST-MIB › prvtNetworkLoopTestDuration
prvtNetworkLoopTestDuration
Module: PRVT-NETWORK-LOOPBACK-TEST-MIB
OID (symbolic): PRVT-NETWORK-LOOPBACK-TEST-MIB::prvtNetworkLoopTestDuration
OID (numeric): 1.3.6.1.4.1.738.1.6.7.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: An integer that identifies the duration in seconds of Loopback test. For infinite Loopback tests object will have the value 0.
What is prvtNetworkLoopTestDuration?
This sets how many seconds a network loopback test should run once started, with a value of 0 meaning the test should run indefinitely rather than for a fixed duration. Administrators configure this before initiating a loopback test to control how long the device holds a port in loopback mode for cable or link verification, avoiding leaving the port stuck in test mode longer than intended. Setting this object to 60 would run a one-minute loopback test before the port automatically returns to normal operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.7.1.1.1.1 snmpwalk -v2c -c public <target> PRVT-NETWORK-LOOPBACK-TEST-MIB::prvtNetworkLoopTestDuration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.7.1.1.1.1.1 snmpget -v2c -c public <target> PRVT-NETWORK-LOOPBACK-TEST-MIB::prvtNetworkLoopTestDuration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.738.1.6.7.1.1.1.1.1 i <value>
Start monitoring BATM Advanced Communication / Telco Systems switching equipment (loopback test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-NETWORK-LOOPBACK-TEST-MIB::prvtNetworkLoopTestDuration OID value, configure state conditions and alerts, and monitor any BATM Advanced Communication / Telco Systems switching equipment (loopback test) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.7 | prvtLoadBalMIB | PRVT-LOAD-BALANCE-MIB |
| 1.3.6.1.4.1.738.1.6.7.1 | prvtLoadBalObjects | PRVT-LOAD-BALANCE-MIB |
| 1.3.6.1.4.1.738.1.6.7.1.1 | prvtLoadBalDistributionMode | PRVT-LOAD-BALANCE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.7.1.1.1 | prvtNetworkLoopbackTestEntry | PRVT-NETWORK-LOOPBACK-TEST-MIB |
| 1.3.6.1.4.1.738.1.6.7.1.1.1.1 | prvtNetworkLoopTestDuration | PRVT-NETWORK-LOOPBACK-TEST-MIB |