PRVT-LLDP-MIB

All MIBs › PRVT-LLDP-MIB

Organization: BATM Advanced Communication

Last Updated: 2009-07-28

Category: LLDP

Description: Manages BATM Advanced Communication LLDP neighbor discovery, port description advertisement, and neighbor table maintenance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-LLDP-MIB?

PRVT-LLDP-MIB is a vendor MIB from BATM Advanced Communication managing Link Layer Discovery Protocol (LLDP) neighbor discovery, configuration, and statistics on its devices. It exposes LLDP protocol timers (reinitialization delay, transmit intervals/hold), neighbor table maintenance statistics, and per-port transmit statistics. Its monitoring value is primarily software/protocol status: it lets an operator verify LLDP is enabled and functioning, and by tracking neighbor table insert/delete/ageout/drop counters, detect unstable neighbor relationships that could indicate a flapping link or misconfigured neighbor. It builds directly on the standard IEEE 802.1AB LLDP model (paralleling the standard LLDP-MIB) as a vendor-specific extension. It is deployed on BATM Advanced Communication switches used in networks relying on LLDP for topology discovery and neighbor management applications. Engineers can download the PRVT-LLDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-LLDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM Advanced Communication network device

Monitoring Examples

An admin would poll prvtLldpStatsRemTablesInserts, prvtLldpStatsRemTablesDeletes, and prvtLldpStatsRemTablesAgeouts to see how often neighbor entries are being added, removed, or aging out, and check prvtLldpStatsTxPortTable for per-port transmit statistics. A high prvtLldpStatsRemTablesAgeouts count combined with frequent prvtLldpStatsRemTablesLastChange updates would suggest an unstable neighbor connection or intermittent link. The prvtLldpEnable and timer objects (prvtLldpTransmitInterval, prvtLldpReinitDelay) let an operator confirm LLDP configuration matches expected settings.

What Can Be Monitored

LLDP enable status
neighbor table insert/delete/ageout counts
per-port LLDP transmit statistics
LLDP timer configuration

Imported Objects

From PRVT-SWITCH-MIB

switch

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

PhysAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF lldpNewRemoteInfo	1.3.6.1.4.1.738.1.5.145.0.1			New Remote Info
T/F prvtLldpAdvBasicPortDescr	1.3.6.1.4.1.738.1.5.145.1.12.1.6	TruthValue	read-create	Specify if the description of the configured interface will be advertised by LLDP.
T/F prvtLldpAdvBasicPortManAddr	1.3.6.1.4.1.738.1.5.145.1.12.1.5	TruthValue	read-create	Specify if LLDP will advertise the management addresses.
T/F prvtLldpAdvBasicPortSysCap	1.3.6.1.4.1.738.1.5.145.1.12.1.7	TruthValue	read-create	Specify if system capabilities information (bitmap) will be sent to the interface being configured.
T/F prvtLldpAdvBasicPortSysDescr	1.3.6.1.4.1.738.1.5.145.1.12.1.8	TruthValue	read-create	Specify if the system description will be sent to the interface being configured.
T/F prvtLldpAdvBasicPortSysName	1.3.6.1.4.1.738.1.5.145.1.12.1.9	TruthValue	read-create	Specify if the system name will be sent to the interface being configured
INT prvtLldpCfgPortMode	1.3.6.1.4.1.738.1.5.145.1.12.1.3	INTEGER	read-create	Set port admin status
OCT prvtLldpCfgPortName	1.3.6.1.4.1.738.1.5.145.1.12.1.1	OCTET STRING	not-accessible	Interface name.
ROW prvtLldpCfgPortRowStatus	1.3.6.1.4.1.738.1.5.145.1.12.1.2	RowStatus	read-create	The RowStatus entry for this interface.
T/F prvtLldpCfgPortSnmpNotify	1.3.6.1.4.1.738.1.5.145.1.12.1.4	TruthValue	read-create	Configure sending of LLDP SNMP notifications
T/F prvtLldpDot1PortProtoIdentity	1.3.6.1.4.1.738.1.5.145.1.12.1.11	TruthValue	read-create	Protocol Identity TLVs.
T/F prvtLldpDot1PortProtoVlanId	1.3.6.1.4.1.738.1.5.145.1.12.1.13	TruthValue	read-create	VLAN ID TLVs.
T/F prvtLldpDot1PortVlanId	1.3.6.1.4.1.738.1.5.145.1.12.1.10	TruthValue	read-create	Port VLAN-Id TLVs.
T/F prvtLldpDot1PortVlanName	1.3.6.1.4.1.738.1.5.145.1.12.1.12	TruthValue	read-create	VLAN Name TLVs.
T/F prvtLldpDot3PortLAG	1.3.6.1.4.1.738.1.5.145.1.12.1.14	TruthValue	read-create	Link-aggregation TLVs.
T/F prvtLldpDot3PortMacPhy	1.3.6.1.4.1.738.1.5.145.1.12.1.15	TruthValue	read-create	Mac-phy TLVs.
T/F prvtLldpDot3PortMaxFrameSize	1.3.6.1.4.1.738.1.5.145.1.12.1.16	TruthValue	read-create	Maximum Frame Size TLV.
T/F prvtLldpDot3PortPowerViaMdi	1.3.6.1.4.1.738.1.5.145.1.12.1.17	TruthValue	read-create	Power-via-mdi TLV.
T/F prvtLldpEnable	1.3.6.1.4.1.738.1.5.145.1.1	TruthValue	read-write	Enable/disable the LLDP on the device
prvtLldpLocalSystemDataObjects	1.3.6.1.4.1.738.1.5.145.1.10
OCT prvtLldpLocChassisId	1.3.6.1.4.1.738.1.5.145.1.10.2	OCTET STRING	read-only	MAC address of the local chassis.
INT prvtLldpLocChassisIdSubtype	1.3.6.1.4.1.738.1.5.145.1.10.1	INTEGER	read-only	Subtype of the local Chasis
prvtLldpLocManAddrEntry	1.3.6.1.4.1.738.1.5.145.1.11.1		not-accessible	Local management address entry
OCT prvtLldpLocManAddress	1.3.6.1.4.1.738.1.5.145.1.11.1.2	OCTET STRING	not-accessible	Local management address
I32 prvtLldpLocManAddrIfId	1.3.6.1.4.1.738.1.5.145.1.11.1.5	Integer32	read-only	Interface index of local management address
INT prvtLldpLocManAddrIfSubtype	1.3.6.1.4.1.738.1.5.145.1.11.1.4	INTEGER	read-only	Local management addres interface subtype
I32 prvtLldpLocManAddrLen	1.3.6.1.4.1.738.1.5.145.1.11.1.3	Integer32	read-only	Lenght of local managemet address
OID prvtLldpLocManAddrOID	1.3.6.1.4.1.738.1.5.145.1.11.1.6	OBJECT IDENTIFIER	read-only
INT prvtLldpLocManAddrSubtype	1.3.6.1.4.1.738.1.5.145.1.11.1.1	INTEGER	not-accessible	Subtype of local management address
prvtLldpLocManAddrTable	1.3.6.1.4.1.738.1.5.145.1.11		not-accessible	Table of local management addresses.
BIT prvtLldpLocSysCapEnabled	1.3.6.1.4.1.738.1.5.145.1.10.6	Bits	read-only	Local system enabled capabilities.
BIT prvtLldpLocSysCapSupported	1.3.6.1.4.1.738.1.5.145.1.10.5	Bits	read-only	Local system supported capabilities.
OCT prvtLldpLocSysDesc	1.3.6.1.4.1.738.1.5.145.1.10.4	OCTET STRING	read-only	Local system description.
OCT prvtLldpLocSysName	1.3.6.1.4.1.738.1.5.145.1.10.3	OCTET STRING	read-only	Local system name.
prvtLldpMIB	1.3.6.1.4.1.738.1.5.145			Management Information Base module for LLDP configuration
prvtlldpNotifications	1.3.6.1.4.1.738.1.5.145.0
prvtLldpObjects	1.3.6.1.4.1.738.1.5.145.1
prvtLldpPortEntry	1.3.6.1.4.1.738.1.5.145.1.12.1		not-accessible	Entry for LLDP ports
prvtLldpPortTable	1.3.6.1.4.1.738.1.5.145.1.12		not-accessible	Table of LLDP ports
U32 prvtLldpReinitDelay	1.3.6.1.4.1.738.1.5.145.1.2	Unsigned32	read-write	Specify the time interval (in [s]) at which the interface is checked if is enabled again so that the port can be reinitialized
OCT prvtLldpRemDbIfNum	1.3.6.1.4.1.738.1.5.145.1.13.1.1	OCTET STRING	not-accessible	Interface name.
OCT prvtLldpRemDbPortChasId	1.3.6.1.4.1.738.1.5.145.1.13.1.5	OCTET STRING	read-only	Remote Chassis ID
INT prvtLldpRemDbPortChasIdSub	1.3.6.1.4.1.738.1.5.145.1.13.1.4	INTEGER	read-only	Subtype of the Remote Chasis
I32 prvtLldpRemDbPortDataAge	1.3.6.1.4.1.738.1.5.145.1.13.1.3	Integer32	read-only	Remote Data Age
I32 prvtLldpRemDbPortDataTTL	1.3.6.1.4.1.738.1.5.145.1.13.1.2	Integer32	read-only	Remote Data TTL
OCT prvtLldpRemDbPortDescr	1.3.6.1.4.1.738.1.5.145.1.13.1.10	OCTET STRING	read-only	Remote port description.
prvtLldpRemDbPortEntry	1.3.6.1.4.1.738.1.5.145.1.13.1		not-accessible	An entry for received LLDPDU from given port.
PHY prvtLldpRemDbPortId	1.3.6.1.4.1.738.1.5.145.1.13.1.7	PhysAddress	read-only	Remote Port ID
INT prvtLldpRemDbPortIdSub	1.3.6.1.4.1.738.1.5.145.1.13.1.6	INTEGER	read-only	Subtype of the Remote Port
OCT prvtLldpRemDbPortManAddr	1.3.6.1.4.1.738.1.5.145.1.13.1.13	OCTET STRING	read-only	Remote management address.
BIT prvtLldpRemDbPortSysCapEnabled	1.3.6.1.4.1.738.1.5.145.1.13.1.12	Bits	read-only	Remote System enabled capabilities.
BIT prvtLldpRemDbPortSysCapSupported	1.3.6.1.4.1.738.1.5.145.1.13.1.11	Bits	read-only	Remote System supported capabilities.
OCT prvtLldpRemDbPortSysDescr	1.3.6.1.4.1.738.1.5.145.1.13.1.9	OCTET STRING	read-only	Remote system description.
OCT prvtLldpRemDbPortSysName	1.3.6.1.4.1.738.1.5.145.1.13.1.8	OCTET STRING	read-only	Remote system name.
prvtLldpRemDbPortTable	1.3.6.1.4.1.738.1.5.145.1.13		not-accessible	A table containing remote Db.
U32 prvtLldpSnmpNotifyInterval	1.3.6.1.4.1.738.1.5.145.1.3	Unsigned32	read-write	Set the SNMP notification interval (in [s])
prvtLldpStatisticsObjects	1.3.6.1.4.1.738.1.5.145.1.7
U32 prvtLldpStatsRemTablesAgeouts	1.3.6.1.4.1.738.1.5.145.1.7.5	Unsigned32	read-only	Number of entries dropped from remote table
U32 prvtLldpStatsRemTablesDeletes	1.3.6.1.4.1.738.1.5.145.1.7.3	Unsigned32	read-only	Number of entries deleted in remote table
U32 prvtLldpStatsRemTablesDrops	1.3.6.1.4.1.738.1.5.145.1.7.4	Unsigned32	read-only	Number of entries dropped from remote table
U32 prvtLldpStatsRemTablesInserts	1.3.6.1.4.1.738.1.5.145.1.7.2	Unsigned32	read-only	Number of entries insterted in remote table
U32 prvtLldpStatsRemTablesLastChange	1.3.6.1.4.1.738.1.5.145.1.7.1	Unsigned32	read-only	Time from last remote table change.
OCT prvtLldpStatsRxIfNum	1.3.6.1.4.1.738.1.5.145.1.9.1.1	OCTET STRING	not-accessible	Interface name.
U32 prvtLldpStatsRxPortAgeoutsTotal	1.3.6.1.4.1.738.1.5.145.1.9.1.7	Unsigned32	read-only	Total number of age outs on port.
prvtLldpStatsRxPortEntry	1.3.6.1.4.1.738.1.5.145.1.9.1		not-accessible	An entry for received LLDPDU from given port.
U32 prvtLldpStatsRxPortFramesDiscardedTotal	1.3.6.1.4.1.738.1.5.145.1.9.1.2	Unsigned32	read-only	Total number of discarded frames from port.
U32 prvtLldpStatsRxPortFramesErrors	1.3.6.1.4.1.738.1.5.145.1.9.1.3	Unsigned32	read-only	Total number of frame errors on port.
U32 prvtLldpStatsRxPortFramesTotal	1.3.6.1.4.1.738.1.5.145.1.9.1.4	Unsigned32	read-only	Total number of received frames from port.
prvtLldpStatsRxPortTable	1.3.6.1.4.1.738.1.5.145.1.9		not-accessible	A table containing received LLDPDU from all ports.
U32 prvtLldpStatsRxPortTLVsDiscardedTotal	1.3.6.1.4.1.738.1.5.145.1.9.1.5	Unsigned32	read-only	Total number of discarded TLVs from port
U32 prvtLldpStatsRxPortTLVsUnrecognizedTotal	1.3.6.1.4.1.738.1.5.145.1.9.1.6	Unsigned32	read-only	Total number of unrecognized TLVs from port.
OCT prvtLldpStatsTxIfNum	1.3.6.1.4.1.738.1.5.145.1.8.1.1	OCTET STRING	not-accessible	Interface name.
prvtLldpStatsTxPortEntry	1.3.6.1.4.1.738.1.5.145.1.8.1		not-accessible	An entry for send LLDPDU from given port.
U32 prvtLldpStatsTxPortFramesMalformed	1.3.6.1.4.1.738.1.5.145.1.8.1.3	Unsigned32	read-only	Malformed LLDPDUs send from this interface
U32 prvtLldpStatsTxPortFramesTotal	1.3.6.1.4.1.738.1.5.145.1.8.1.2	Unsigned32	read-only	Total LLDPDUs send from this interface
prvtLldpStatsTxPortTable	1.3.6.1.4.1.738.1.5.145.1.8		not-accessible	A table containing send LLDPDU from all ports.
U32 prvtLldpTransmitDelay	1.3.6.1.4.1.738.1.5.145.1.4	Unsigned32	read-write	Specify the minimum transmint delay interval (in [s])
U32 prvtLldpTransmitHold	1.3.6.1.4.1.738.1.5.145.1.5	Unsigned32	read-write	Specify the transmit-hold parameter
U32 prvtLldpTransmitInterval	1.3.6.1.4.1.738.1.5.145.1.6	Unsigned32	read-write	Specify the minimum transmint interval (in [s])

RFC description

BATM Advanced Communications private MIB for LLDP (Link Layer Discovery Protocol) configuration and management on T-Metro Switches.

Start monitoring BATM Advanced Communication network device (LLDP neighbor discovery) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-LLDP-MIB

What Is PRVT-LLDP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description