PROTEON-MIB :: proElsSubSysTrapDisable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPROTEON-MIBproElsSubSysTrapDisable

proElsSubSysTrapDisable

Module: PROTEON-MIB

OID (symbolic): PROTEON-MIB::proElsSubSysTrapDisable

OID (numeric): 1.3.6.1.4.1.1.6.2.2.1.7

Node type: OBJECT-TYPE

Type: ProElsMsgLogLevel

Access: read-write

Description: A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrTrapLevel variable.

A SET of this object to one of the other enumerated values has the effect of disabling ELS events of the specified level to be sent via an SNMP trap.

For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS.

For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated.

What is proElsSubSysTrapDisable?

Setting this to a ProElsMsgLogLevel value disables SNMP trap generation for ELS events at that level for this subsystem; reading it always returns other(1) since it's a write-only control (check proElsSubSysCurrTrapLevel for the actual current setting). An admin uses this to stop trap floods from a specific subsystem's lower-severity events, noting that on non-2210 platforms the change only takes effect after the configuration is reloaded.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1.6.2.2.1.7
snmpwalk -v2c -c public <target> PROTEON-MIB::proElsSubSysTrapDisable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1.6.2.2.1.7.1
snmpget -v2c -c public <target> PROTEON-MIB::proElsSubSysTrapDisable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1.6.2.2.1.7.1 s <value>

Start monitoring Proteon router/IP gateway, legacy 1980s-1990s with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROTEON-MIB::proElsSubSysTrapDisable OID value, configure state conditions and alerts, and monitor any Proteon router/IP gateway, legacy 1980s-1990s from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1proteonOpenROUTE-MIB
1.3.6.1.4.1.1.6proSystemOpenROUTE-MIB
1.3.6.1.4.1.1.6.2proElsOpenROUTE-MIB
1.3.6.1.4.1.1.6.2.2proElsSubSysTableOpenROUTE-MIB
1.3.6.1.4.1.1.6.2.2.1proElsSubSysTableEntryOpenROUTE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1.6.2.2.1.7proElsSubSysTrapDisablePROTEON-MIB