All MIBs › PROTEON-MIB › proActionReset
proActionReset
Module: PROTEON-MIB
OID (symbolic): PROTEON-MIB::proActionReset
OID (numeric): 1.3.6.1.4.1.1.1.5.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object, when read, returns a value of zero.
A set of this object causes the router to be reset. The value represents the delay (in seconds) before the reset will take affect.
This object should only be SET to 0 or a positive number
What is proActionReset?
Reading this object always returns zero; setting it to zero or a positive number resets the router after that many seconds of delay. An admin sets this to schedule a router reset (equivalent to OPCON's RESTART on 2210/2212) during a maintenance window rather than resetting immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1.1.5.2 snmpwalk -v2c -c public <target> PROTEON-MIB::proActionReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1.1.5.2.1 snmpget -v2c -c public <target> PROTEON-MIB::proActionReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1.1.5.2.1 i <value>
Start monitoring Proteon router/IP gateway, legacy 1980s-1990s with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROTEON-MIB::proActionReset OID value, configure state conditions and alerts, and monitor any Proteon router/IP gateway, legacy 1980s-1990s from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1 | proteon | OpenROUTE-MIB |
| 1.3.6.1.4.1.1.1 | proAdmin | OpenROUTE-MIB |
| 1.3.6.1.4.1.1.1.5 | proPriv | OpenROUTE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1.1.5.2 | proActionReset | PROTEON-MIB |