All MIBs › PROTEON-MIB › proActionReload

proActionReload

OID (symbolic): PROTEON-MIB::proActionReload

OID (numeric): 1.3.6.1.4.1.1.1.5.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object, when read, returns a value of zero. A set of this object causes the router to be reloaded. The value represents the delay (in seconds) before the reload will take affect.

This object should only be SET to 0 or a positive number

What is proActionReload?

Reading this object always returns zero; setting it to zero or a positive number reloads the router after that many seconds of delay. An admin sets this to schedule a full reload (equivalent to OPCON's RELOAD command) with a grace period, e.g. to let an SNMP session finish before the device restarts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1.1.5.4
snmpwalk -v2c -c public <target> PROTEON-MIB::proActionReload

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1.1.5.4.1
snmpget -v2c -c public <target> PROTEON-MIB::proActionReload.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1.1.5.4.1 i <value>

Start monitoring Proteon router/IP gateway, legacy 1980s-1990s with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROTEON-MIB::proActionReload OID value, configure state conditions and alerts, and monitor any Proteon router/IP gateway, legacy 1980s-1990s from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.1	proteon	OpenROUTE-MIB
1.3.6.1.4.1.1.1	proAdmin	OpenROUTE-MIB
1.3.6.1.4.1.1.1.5	proPriv	OpenROUTE-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.1.1.5.4	proActionReload	PROTEON-MIB

PROTEON-MIB :: proActionReload

proActionReload

Module

This MIB depends on