All MIBs › PRIVAT-MultiLAN-Switch-MIB › hirmaSelfTestGroupSQETest
hirmaSelfTestGroupSQETest
Module: PRIVAT-MultiLAN-Switch-MIB
OID (symbolic): PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestGroupSQETest
OID (numeric): 1.3.6.1.4.1.248.2.1.1.2.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Reading this value will offer the state of the SQE test. SQE test may be enabled by setting this object to enabled (1).
Detecting a SQE test problem will change the value to not-ok (3).
What is hirmaSelfTestGroupSQETest?
Reports and controls the Signal Quality Error (SQE) heartbeat test on this interface card's Ethernet transceiver. An admin can enable the test by writing enabled-ok(1); if the switch subsequently detects an SQE problem, the value automatically flips to not-ok(3), flagging a transceiver fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.2.4.1.3 snmpwalk -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestGroupSQETest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.2.4.1.3.1 snmpget -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestGroupSQETest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.2.1.1.2.4.1.3.1 i <value>
Start monitoring Legacy Hirschmann MultiLAN Switch equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestGroupSQETest OID value, configure state conditions and alerts, and monitor any Legacy Hirschmann MultiLAN Switch equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.2 | multiLANSwitch | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1 | bridge1 | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1 | bridgemgmt | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2 | hirmaSelfTestCapability | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2.4 | hirmaSelfTestGroupTable | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2.4.1 | hirmaSelfTestGroupEntry | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2.4.1.3 | hirmaSelfTestGroupSQETest | PRIVAT-MultiLAN-Switch-MIB |