All MIBs › PRIVAT-MultiLAN-Switch-MIB › hirmaSelfTestBridgeSetDefaults
hirmaSelfTestBridgeSetDefaults
Module: PRIVAT-MultiLAN-Switch-MIB
OID (symbolic): PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestBridgeSetDefaults
OID (numeric): 1.3.6.1.4.1.248.2.1.1.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Resets all parameters to the default value. Just like after a cold-start.
What is hirmaSelfTestBridgeSetDefaults?
Setting this to reset(1) restores every configurable parameter on the switch to its factory default, equivalent to what happens after a cold start. An admin would use this as a last resort to recover from a misconfiguration rather than manually reverting each setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.2.3 snmpwalk -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestBridgeSetDefaults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.2.3.1 snmpget -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestBridgeSetDefaults.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.2.1.1.2.3.1 i <value>
Start monitoring Legacy Hirschmann MultiLAN Switch equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRIVAT-MultiLAN-Switch-MIB::hirmaSelfTestBridgeSetDefaults OID value, configure state conditions and alerts, and monitor any Legacy Hirschmann MultiLAN Switch equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.2 | multiLANSwitch | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1 | bridge1 | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1 | bridgemgmt | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2 | hirmaSelfTestCapability | PRIVAT-MultiLAN-Switch-MIB |
| 1.3.6.1.4.1.248.2.1.1.2.3 | hirmaSelfTestBridgeSetDefaults | PRIVAT-MultiLAN-Switch-MIB |