PRIVAT-MultiLAN-Switch-MIB :: hirmaBasBridgeSwitches

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPRIVAT-MultiLAN-Switch-MIBhirmaBasBridgeSwitches

hirmaBasBridgeSwitches

Module: PRIVAT-MultiLAN-Switch-MIB

OID (symbolic): PRIVAT-MultiLAN-Switch-MIB::hirmaBasBridgeSwitches

OID (numeric): 1.3.6.1.4.1.248.2.1.1.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: State of the DIP-switches on
the  memoryboard (EBGM).

The DIP-switches are defined as follows:

switch |         on          |        off
-------------------------------------------------
   1   | service             | normal
   2   | service             | normal
   3   | relay on            | relay off
   4   | LANswitch           | 802.3 Bridge
   5   | service             | normal
   6   | Spanning Tree on    | Spanning Tree off
   7   | Filtering on        | Filtering off
   8   | Learning on         | Learning off

What is hirmaBasBridgeSwitches?

Encodes the physical positions of the eight DIP switches on the switch's memory board, covering service mode, relay state, LAN-switch vs 802.3 bridge mode, and the on/off state of Spanning Tree, filtering, and learning. An admin reads this to verify the physical hardware configuration matches what the software reports, e.g. confirming switch 6 enables Spanning Tree before troubleshooting a loop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.1.1.7
snmpwalk -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaBasBridgeSwitches

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.2.1.1.1.1.7.1
snmpget -v2c -c public <target> PRIVAT-MultiLAN-Switch-MIB::hirmaBasBridgeSwitches.1

Start monitoring Legacy Hirschmann MultiLAN Switch equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRIVAT-MultiLAN-Switch-MIB::hirmaBasBridgeSwitches OID value, configure state conditions and alerts, and monitor any Legacy Hirschmann MultiLAN Switch equipment from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.248hirschmannHM2-TC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.248.2multiLANSwitchPRIVAT-MultiLAN-Switch-MIB
1.3.6.1.4.1.248.2.1bridge1PRIVAT-MultiLAN-Switch-MIB
1.3.6.1.4.1.248.2.1.1bridgemgmtPRIVAT-MultiLAN-Switch-MIB
1.3.6.1.4.1.248.2.1.1.1hirmaBasCapabilityPRIVAT-MultiLAN-Switch-MIB
1.3.6.1.4.1.248.2.1.1.1.1hirmaBasBridgeTablePRIVAT-MultiLAN-Switch-MIB
1.3.6.1.4.1.248.2.1.1.1.1.7hirmaBasBridgeSwitchesPRIVAT-MultiLAN-Switch-MIB