All MIBs › PPP-SEC-MIB › pppSecuritySecretsDirection
pppSecuritySecretsDirection
Module: PPP-SEC-MIB
OID (symbolic): PPP-SEC-MIB::pppSecuritySecretsDirection
OID (numeric): 1.3.6.1.2.1.10.23.2.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the direction in which a particular ID/Secret pair is valid. If this object is local-to-remote then the local PPP entity will use the ID/Secret pair when attempting to authenticate the local PPP entity to the remote PPP entity. If this object is remote-to-local then the local PPP entity will expect the ID/Secret pair to be used by the remote PPP entity when the remote PPP entity attempts to authenticate itself to the local PPP entity.
What is pppSecuritySecretsDirection?
This enumerated value specifies whether an ID/Secret credential pair is used when the local PPP entity authenticates itself to the remote peer (local-to-remote) or when it expects the remote peer to authenticate using it (remote-to-local). Admins set the direction to match the credential's actual role in the PPP authentication handshake. Setting it to remote-to-local configures this entry as the credential the local device expects the far-end peer to present during authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.23.2.3.1.3 snmpwalk -v2c -c public <target> PPP-SEC-MIB::pppSecuritySecretsDirection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.23.2.3.1.3.1 snmpget -v2c -c public <target> PPP-SEC-MIB::pppSecuritySecretsDirection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.23.2.3.1.3.1 i <value>
Start monitoring Routers/access devices using PPP with security negotiation (authentication protocol config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PPP-SEC-MIB::pppSecuritySecretsDirection OID value, configure state conditions and alerts, and monitor any Routers/access devices using PPP with security negotiation (authentication protocol config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.23 | ppp | MRVINREACH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.23.2 | pppSecurity | PPP-SEC-MIB |
| 1.3.6.1.2.1.10.23.2.3 | pppSecuritySecretsTable | PPP-SEC-MIB |
| 1.3.6.1.2.1.10.23.2.3.1 | pppSecuritySecretsEntry | PPP-SEC-MIB |
| 1.3.6.1.2.1.10.23.2.3.1.3 | pppSecuritySecretsDirection | PPP-SEC-MIB |