All MIBs › POWERSUPPLY-MIB › hpicfXpsZonePowerShareMap
hpicfXpsZonePowerShareMap
Module: POWERSUPPLY-MIB
OID (symbolic): POWERSUPPLY-MIB::hpicfXpsZonePowerShareMap
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This indicates the power share map on the current zone. The map indicates the ports on the external power supply that is configured to deliver power to the connected switches. Zone 1 has 4 ports: A-D. Zone 2 and 3 have only 2 ports: A-B. Within the map, the most significant bit represents port D And the least significant bit represents port A. If a bit is set to 1, then the given port is enabled on this zone. By default, all the bits are enabled in this map.Set requests for this object will take longer time for completion. Status of the set request can be read from hpicfXpsPowerShareReqStatus object. Modifications to power share map needs additional force option which depends on hpicfXpsZonePowerShareForce.
What is hpicfXpsZonePowerShareMap?
Sets which of the zone's power ports (up to 4 in zone 1, 2 in zones 2 and 3) are enabled to deliver power, encoded as a bitmap with the least-significant bit for port A; changes take time to apply, their status is readable from hpicfXpsPowerShareReqStatus, and disabling an active port requires setting hpicfXpsZonePowerShareForce depending on how gracefully the admin wants low-priority PoE devices affected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3 snmpwalk -v2c -c public <target> POWERSUPPLY-MIB::hpicfXpsZonePowerShareMap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3.1 snmpget -v2c -c public <target> POWERSUPPLY-MIB::hpicfXpsZonePowerShareMap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3.1 s <value>
Start monitoring HP/HPE ProCurve/Aruba networking switches (power supply entity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POWERSUPPLY-MIB::hpicfXpsZonePowerShareMap OID value, configure state conditions and alerts, and monitor any HP/HPE ProCurve/Aruba networking switches (power supply entity status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.55 | hpicfPsMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1 | hpicfEntityPs | POWERSUPPLY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4 | hpicfXpsZoneTable | POWERSUPPLY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1 | hpicfXpsZoneEntry | POWERSUPPLY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3 | hpicfXpsZonePowerShareMap | POWERSUPPLY-MIB |