All MIBs › POWERHUB-VLAN-MIB › preDot1qVlanPortStatus
preDot1qVlanPortStatus
Module: POWERHUB-VLAN-MIB
OID (symbolic): POWERHUB-VLAN-MIB::preDot1qVlanPortStatus
OID (numeric): 1.3.6.1.4.1.326.1.8.1.1.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this port relative to the VLAN that points at this port group. The meanings of each value are:
autoActive: Means that the port is part of this VLAN because the switch automatically added it. allowed: Means that the port has been configured so that if all other criteria (if any) are met, this port is allowed to be in this VLAN. allowedActive: Means the same as allowed plus the fact that there is a device attached to this port and participating in the VLAN. allowedNotAvail: This value is only needed for devices that don't allow a port to be in more than one VLAN at a time. This value means that this port also exists in some other VLAN(s) and is active in another VLAN. Therefore this port is not available to be used in this VLAN. notAssociated: Means that the Port Group is not currently associated with any VLAN.
What is preDot1qVlanPortStatus?
Reports the status of a specific port relative to the VLAN pointing at its port group: whether it was auto-added, is merely allowed, is allowed and actively participating, is allowed but unavailable because it's active in another VLAN, or the port group isn't associated with any VLAN. Admins use this to understand exactly why a given port is or isn't currently forwarding traffic for a VLAN. A port showing allowedNotAvail(4) tells the admin that port is tied up actively serving a different VLAN on a device that doesn't support multi-VLAN ports simultaneously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.1.8.1.1.2.1.4 snmpwalk -v2c -c public <target> POWERHUB-VLAN-MIB::preDot1qVlanPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.1.8.1.1.2.1.4.1 snmpget -v2c -c public <target> POWERHUB-VLAN-MIB::preDot1qVlanPortStatus.1
Start monitoring 3Com PowerHub switch/router (VLAN/802.1Q bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POWERHUB-VLAN-MIB::preDot1qVlanPortStatus OID value, configure state conditions and alerts, and monitor any 3Com PowerHub switch/router (VLAN/802.1Q bridging) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.1 | admin | Fore-Common-MIB |
| 1.3.6.1.4.1.326.1.8 | preDot1qVlanMIB | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.1.8.1 | preDot1qVlanMIBObjects | POWERHUB-VLAN-MIB |
| 1.3.6.1.4.1.326.1.8.1.1 | preDot1qVlanConfGroup | POWERHUB-VLAN-MIB |
| 1.3.6.1.4.1.326.1.8.1.1.2 | preDot1qVlanPortGroupTable | POWERHUB-VLAN-MIB |
| 1.3.6.1.4.1.326.1.8.1.1.2.1 | preDot1qVlanPortGroupEntry | POWERHUB-VLAN-MIB |
| 1.3.6.1.4.1.326.1.8.1.1.2.1.4 | preDot1qVlanPortStatus | POWERHUB-VLAN-MIB |