All MIBs › PNETMOD-MIB › accuVoltage
accuVoltage
Module: PNETMOD-MIB
OID (symbolic): PNETMOD-MIB::accuVoltage
OID (numeric): 1.3.6.1.4.1.27533.5.3.1
Node type: OBJECT-TYPE
Type: SignedNumber
Access: read-only
Description: Accumulator Voltage value XXXX divide by 10 to get XXX.X
What is accuVoltage?
This value reports the accumulator (battery) voltage, encoded as an integer that must be divided by 10 to get the actual reading, for example a raw value of 480 representing 48.0 volts. Administrators use it to monitor the health and charge state of the backup battery bank powering this module. For example, a voltage reading trending downward over time without a corresponding grid outage could indicate a battery nearing end of life.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.27533.5.3.1 snmpwalk -v2c -c public <target> PNETMOD-MIB::accuVoltage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.27533.5.3.1.1 snmpget -v2c -c public <target> PNETMOD-MIB::accuVoltage.1
Start monitoring modular power/network distribution module, vendor-specific telecom power equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PNETMOD-MIB::accuVoltage OID value, configure state conditions and alerts, and monitor any modular power/network distribution module, vendor-specific telecom power equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.27533 | bke | PNETMOD-MIB |
| 1.3.6.1.4.1.27533.5 | pnetMod | PNETMOD-MIB |
| 1.3.6.1.4.1.27533.5.3 | accumulator | PNETMOD-MIB |
| 1.3.6.1.4.1.27533.5.3.1 | accuVoltage | PNETMOD-MIB |