All MIBs › PLEXCOM-MIB › plxTrapStandardEnable
plxTrapStandardEnable
Module: PLEXCOM-MIB
OID (symbolic): PLEXCOM-MIB::plxTrapStandardEnable
OID (numeric): 1.3.6.1.4.1.465.11.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable or disable generation of standard traps for this entry.
What is plxTrapStandardEnable?
Turns generic/standard SNMP traps (like coldStart, linkUp/linkDown) on or off for this device; an admin disables it if a management station doesn't want the baseline standard traps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.11.3.1.4 snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxTrapStandardEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.465.11.3.1.4.1 snmpget -v2c -c public <target> PLEXCOM-MIB::plxTrapStandardEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.465.11.3.1.4.1 i <value>
Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxTrapStandardEnable OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.465 | plexcom | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11 | plxSystemAdmin | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3 | plxSysAdmTrapTable | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3.1 | plxSysAdmTrapEntry | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3.1.4 | plxTrapStandardEnable | PLEXCOM-MIB |