All MIBs › PLEXCOM-MIB › plxTrapRepeaterEnable
plxTrapRepeaterEnable
Module: PLEXCOM-MIB
OID (symbolic): PLEXCOM-MIB::plxTrapRepeaterEnable
OID (numeric): 1.3.6.1.4.1.465.11.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable or disable Repeater MIB specific trap generation for this entry.
What is plxTrapRepeaterEnable?
Turns traps defined by the standard Repeater MIB on or off for this device, letting an admin silence that specific trap category separately from Plexcom's own traps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.11.3.1.6 snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxTrapRepeaterEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.465.11.3.1.6.1 snmpget -v2c -c public <target> PLEXCOM-MIB::plxTrapRepeaterEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.465.11.3.1.6.1 i <value>
Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxTrapRepeaterEnable OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.465 | plexcom | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11 | plxSystemAdmin | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3 | plxSysAdmTrapTable | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3.1 | plxSysAdmTrapEntry | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.11.3.1.6 | plxTrapRepeaterEnable | PLEXCOM-MIB |