All MIBs › PLEXCOM-MIB › plxStBrSTPDisabled
plxStBrSTPDisabled
Module: PLEXCOM-MIB
OID (symbolic): PLEXCOM-MIB::plxStBrSTPDisabled
OID (numeric): 1.3.6.1.4.1.465.6.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Flag used to enable or disable 802.1 Spanning Tree Protocol operation.
What is plxStBrSTPDisabled?
Read-write switch to turn 802.1D Spanning Tree Protocol on (enabled(0)) or off (disabled(1)) for this bridge -- note the enum's inverted-looking numbering, where 0 means enabled and 1 means disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.6.1.10 snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxStBrSTPDisabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.465.6.1.10.1 snmpget -v2c -c public <target> PLEXCOM-MIB::plxStBrSTPDisabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.465.6.1.10.1 i <value>
Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxStBrSTPDisabled OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.465 | plexcom | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.6 | plxSpanningTree | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.6.1 | plxStBridge | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.6.1.10 | plxStBrSTPDisabled | PLEXCOM-MIB |