All MIBs › PLEXCOM-MIB › plxIcGroupDetectionStatus
plxIcGroupDetectionStatus
Module: PLEXCOM-MIB
OID (symbolic): PLEXCOM-MIB::plxIcGroupDetectionStatus
OID (numeric): 1.3.6.1.4.1.465.12.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current status of the intruder detection on the corresponding port. The initial default for all ports is inactive(1), meaning that intruder detection is not active on the port. If set to active(2), intruder detection is enabled, and this value will then also be returned for an SNMP GET operation. If an alarm is generated, this variable will take on the value triggered(3). A set with the value active(2) will clear the triggered condition back to active. Intruder detection on the port is effectively still active in the triggered condition. The value triggered(3) is illegal for a SET operation.
What is plxIcGroupDetectionStatus?
Reports/sets the group-wide intruder-detection state: inactive(1) is the default (off), active(2) means detection is running and armed, and triggered(3) means an alarm has fired -- writing active(2) clears a triggered condition back to normal without disabling detection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.12.1.1.5 snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxIcGroupDetectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.465.12.1.1.5.1 snmpget -v2c -c public <target> PLEXCOM-MIB::plxIcGroupDetectionStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.465.12.1.1.5.1 i <value>
Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxIcGroupDetectionStatus OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.465 | plexcom | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.12 | plxSecurity | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.12.1 | plxIntruderControlGroupTable | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.12.1.1 | plxIntruderControlGroupEntry | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.12.1.1.5 | plxIcGroupDetectionStatus | PLEXCOM-MIB |