PLEXCOM-MIB :: plxGroupCascadeConfig

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PLEXCOM-MIB › plxGroupCascadeConfig

plxGroupCascadeConfig

Module: PLEXCOM-MIB

OID (symbolic): PLEXCOM-MIB::plxGroupCascadeConfig

OID (numeric): 1.3.6.1.4.1.465.10.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: An integer defining the configuration control of bussed cascade networks. For PlexNet SX products, this variable is only applicable to 23SX, 24SX, 27SX, etc. modules, and not the 91SX, 29SX, etc. modules. A value of '1' is returned for modules which don't support the variable. A '2' indicates local configuration, meaning the hardware switch has been set on the board to control the cascade network based on hardware switches, and to disallow setting of the cascade network by remote management. A value of '3' indicates remote configuration, meaning the hardware switch is set to allow remote configuration of the cascade networks.

What is plxGroupCascadeConfig?

Reports whether this module's cascade-network selection is controlled by a physical hardware switch on the board (local(2)) or can be set remotely via SNMP (remote(3)); unknown(1) is returned for modules that don't support cascading at all, such as the 91SX/29SX series noted in the source MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.10.2.1.7
snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxGroupCascadeConfig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.465.10.2.1.7.1
snmpget -v2c -c public <target> PLEXCOM-MIB::plxGroupCascadeConfig.1

Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxGroupCascadeConfig OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.465plexcomPLEXCOM-MIB
1.3.6.1.4.1.465.10plxHubPLEXCOM-MIB
1.3.6.1.4.1.465.10.2plxHmBasicGroupTablePLEXCOM-MIB
1.3.6.1.4.1.465.10.2.1plxHmBasicGroupEntryPLEXCOM-MIB
1.3.6.1.4.1.465.10.2.1.7plxGroupCascadeConfigPLEXCOM-MIB