All MIBs › PLEXCOM-MIB › plxGroupAutoPartState
plxGroupAutoPartState
Module: PLEXCOM-MIB
OID (symbolic): PLEXCOM-MIB::plxGroupAutoPartState
OID (numeric): 1.3.6.1.4.1.465.10.2.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: A sequence of bytes defining the auto-partition state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is of the same type as the 'plxPortAutoPartState' variable.
What is plxGroupAutoPartState?
A byte-per-port array showing the auto-partition state of every port on this module in one read, using the same not-partitioned/partitioned values as the per-port plxPortAutoPartState object -- a bulk alternative to polling each port individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.10.2.1.5 snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxGroupAutoPartState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.465.10.2.1.5.1 snmpget -v2c -c public <target> PLEXCOM-MIB::plxGroupAutoPartState.1
Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxGroupAutoPartState OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.465 | plexcom | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.10 | plxHub | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.10.2 | plxHmBasicGroupTable | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.10.2.1 | plxHmBasicGroupEntry | PLEXCOM-MIB |
| 1.3.6.1.4.1.465.10.2.1.5 | plxGroupAutoPartState | PLEXCOM-MIB |