PLEXCOM-MIB :: plxDownloadStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PLEXCOM-MIB › plxDownloadStatus

plxDownloadStatus

Module: PLEXCOM-MIB

OID (symbolic): PLEXCOM-MIB::plxDownloadStatus

OID (numeric): 1.3.6.1.4.1.465.11.2.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of the last download performed. The value downloadSuccess(1) indicates a successful download, and that the device is operating from the downloaded firmware. noDownloadOccurred(2) is returned if no firmware download has yet been performed. If Flash EPROM is not present on the board or is bad, badFlash(3) is returned. The value badServerAddress(4) indicates the IP address of the server configured by the plxDownloadServerAddress variable is bad. badFile(5) indicates the downloaded file had a bad checksum or is corrupt. The value downloadInProgress(14) indicates that a download is currently being performed. The remaining values indicate a TFTP protocol specific failure during the most recent download, and are the error codes defined in RFC 783, offset by six.

What is plxDownloadStatus?

Reports the outcome of the most recent firmware download attempt -- downloadSuccess(1) means the device is now running the new image, badFlash(3)/badServerAddress(4)/badFile(5) point to specific setup problems, downloadInProgress(14) means one is still running, and the remaining codes are standard TFTP protocol errors from RFC 783 offset by six.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.465.11.2.4
snmpwalk -v2c -c public <target> PLEXCOM-MIB::plxDownloadStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.465.11.2.4.1
snmpget -v2c -c public <target> PLEXCOM-MIB::plxDownloadStatus.1

Start monitoring Plexcom network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLEXCOM-MIB::plxDownloadStatus OID value, configure state conditions and alerts, and monitor any Plexcom network equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.465plexcomPLEXCOM-MIB
1.3.6.1.4.1.465.11plxSystemAdminPLEXCOM-MIB
1.3.6.1.4.1.465.11.2plxSysAdmDownloadPLEXCOM-MIB
1.3.6.1.4.1.465.11.2.4plxDownloadStatusPLEXCOM-MIB