All MIBs › PEA-L2CP-IPDSLAM › l2cpPortDownEvent
l2cpPortDownEvent
Module: PEA-L2CP-IPDSLAM
OID (symbolic): PEA-L2CP-IPDSLAM::l2cpPortDownEvent
OID (numeric): 1.3.6.1.4.1.193.72.300.35.10.0.1
Node type: NOTIFICATION-TYPE
Description: A l2cpPortDownEvent trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the adslIfOperStatus object for one of its communication links is about to enter the down state. This trap is used in the L2CP in order to signal port down. This is an internally used notification.
Valid from: EDA 2.2 MA1
Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Other 7: Probable cause Other 8: Partition ID (ID of the partition) 9: Access Loop Circuit ID (Identifier of the port) 10: Transmission system { ADSL1, ADSL2, ADSL2plus, VDSL1, VDSL2, SDSL }
11: Actual Data Rate Upstream ITU-T G.997, section 7.5.2.1 12: Actual Data Rate Downstream ITU-T G.997, section 7.5.2.1
13: DSL line state { IDLE or SILENT } 14: Trap reason { CONDITIONS_CHANGED, EVENT_FORCED, L2CP_ENABLED or L2CP_DISABLED }
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' PEA-L2CP-IPDSLAM::l2cpPortDownEvent snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.193.72.300.35.10.0.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:57010->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (58581682) 6 days, 18:43:36.82 SNMPv2-MIB::snmpTrapOID.0 = OID: PEA-L2CP-IPDSLAM::l2cpPortDownEvent
Start monitoring Ericsson Diax A/S IP DSLAM platforms (BRAS-DSLAM L2CP line signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-L2CP-IPDSLAM::l2cpPortDownEvent OID value, configure state conditions and alerts, and monitor any Ericsson Diax A/S IP DSLAM platforms (BRAS-DSLAM L2CP line signaling) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.35 | peaL2cpIpDslam | PEA-L2CP-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.35.10 | peaL2cpIpDslamTraps | PEA-L2CP-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.35.10.0 | peaL2cpIpDslamTrapsEntry | PEA-L2CP-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.35.10.0.1 | l2cpPortDownEvent | PEA-L2CP-IPDSLAM |