All MIBs › PEA-EQUIPMENT-IPDSLAM › stateEventError

stateEventError

OID (symbolic): PEA-EQUIPMENT-IPDSLAM::stateEventError

OID (numeric): 1.3.6.1.4.1.193.72.300.1.2.0.4

Node type: NOTIFICATION-TYPE

Description: A state/event SW error has been detected on the device. This trap is seen if the IPDSLAM is discarding a message that it did not know how to handle. This kind of problem is sometimes related to an unforeseen state in the IP DSLAM.

Corrective Actions: - Save the alarm information to a file, e.g. using a screenshot. It has to show all the trap parameters. - Give a brief explanation to how the error was provoked. If it can be provoked again, then it is important for the Ericsson support team to know how this is done. - Create a trouble report, which includes the log files, and send it to Ericsson support.

Deprecated from: EDA 1.1 R2A

Parameters 1: Managed object class IPDSLAM 2: Managed object ID [MAC] 3: Sequence number [Alarm sequence number] 4: Perceived severity Major 5: Event time [Timestamp is retrieved from a SNTP server] 6: Event type ProcessingErrorAlarm 7: Probable cause SoftwareError 8: Process name [Name of DMAPI task] 9: Process state [DMAPI task state] 10: File name [The file name from where the alarm was sent] 11: Line no [The line number in the specified file] 12: Sender task [The task name of the task sending the message] 13: Message id [Internal message number] 14: Message data [Message content - hex bytes]

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' PEA-EQUIPMENT-IPDSLAM::stateEventError
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.193.72.300.1.2.0.4

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:52772->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (98226724) 11 days, 8:51:07.24
  SNMPv2-MIB::snmpTrapOID.0 = OID: PEA-EQUIPMENT-IPDSLAM::stateEventError

Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::stateEventError OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.193	ericsson	ANS-COMMON-MIB
1.3.6.1.4.1.193.72	diaxMIB	DXD-SMI
1.3.6.1.4.1.193.72.300	peaIpDslam	DIESEL-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.193.72.300.1	peaEquipmentIpDslam	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2	peaEquipmentIpDslamTraps	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2.0	traps	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2.0.4	stateEventError	PEA-EQUIPMENT-IPDSLAM

PEA-EQUIPMENT-IPDSLAM :: stateEventError

stateEventError

Module

This MIB depends on