All MIBs › PEA-EQUIPMENT-IPDSLAM › phyModeMP
phyModeMP
Module: PEA-EQUIPMENT-IPDSLAM
OID (symbolic): PEA-EQUIPMENT-IPDSLAM::phyModeMP
OID (numeric): 1.3.6.1.4.1.193.72.300.1.1.11.2
Node type: OBJECT-TYPE
Type: PhyModeType
Access: read-write
Description: Ethernet PHY Mode setting. The Phy Mode is coded as a bitfield: * Bit 0: Auto-negotiation. If set, auto-negotiation is OFF else ON. * Bit 2: Full Duplex control. If set, full duplex operation is NOT allowed. * Bit 3: 100 Mbit/s control. If set, 100 Mbit/s operation is NOT allowed. * Bit 4: Half Duplex control. If set, half duplex operation is NOT allowed * Bit 5: 10 Mbit/s control. If set, 10 Mbit/s operation is NOT allowed. Examples of PHY Mode values: * 0x00: Full auto-negotiation. * 0x20: 100 Mbit/s only. Auto-negotiation between half & full duplex. * 0x31: Fixed 100 Mbit/s, full duplex only operation. * 0x25: Fixed 100 Mbit/s, half duplex only operation
What is phyModeMP?
A one-byte bitfield controlling the unit's Ethernet PHY mode — separate bits disable auto-negotiation, full duplex, 100 Mbit/s, half duplex, or 10 Mbit/s operation as needed. For example, writing 0x00 leaves full auto-negotiation on, while 0x31 fixes the link at 100 Mbit/s full duplex — handy when the connected switch port doesn't negotiate reliably.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.11.2 snmpwalk -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::phyModeMP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.11.2.1 snmpget -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::phyModeMP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.1.1.11.2.1 s <value>
Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::phyModeMP OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.1 | peaEquipmentIpDslam | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1 | peaEquipmentIpDslamObjects | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1.11 | configurationData | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1.11.2 | phyModeMP | PEA-EQUIPMENT-IPDSLAM |