PEA-EQUIPMENT-IPDSLAM :: multilinkPreferredInterface

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PEA-EQUIPMENT-IPDSLAM › multilinkPreferredInterface

multilinkPreferredInterface

Module: PEA-EQUIPMENT-IPDSLAM

OID (symbolic): PEA-EQUIPMENT-IPDSLAM::multilinkPreferredInterface

OID (numeric): 1.3.6.1.4.1.193.72.300.1.1.15.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Shows the index of the interface (link) selected for traffic forwarding whenever there is no other explicit indication on which one to choose. The interface is selected during boot - it is the interface the device was booted from. The value is the same as used for interfaces in the IF-MIB (1-based). This interface will be used in case of multilinkMode is set to redundantConfiguration and the rootID is equal for the links. If the rootIDs are different this value is ignored and the one with highest priority (lowest cost) will be selected.

What is multilinkPreferredInterface?

Reports the 1-based IF-MIB interface index of the uplink chosen for traffic forwarding when nothing else indicates which to use — normally the interface the unit booted from. It only governs the choice in redundantConfiguration mode when both links have an equal RSTP root ID; otherwise RSTP's own priority/cost decides.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.2
snmpwalk -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkPreferredInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.2.1
snmpget -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkPreferredInterface.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.1.1.15.2.1 i <value>

Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::multilinkPreferredInterface OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.72diaxMIBDXD-SMI
1.3.6.1.4.1.193.72.300peaIpDslamDIESEL-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.72.300.1peaEquipmentIpDslamPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1peaEquipmentIpDslamObjectsPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1.15multilinkPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1.15.2multilinkPreferredInterfacePEA-EQUIPMENT-IPDSLAM