All MIBs › PEA-EQUIPMENT-IPDSLAM › multilinkMode
multilinkMode
Module: PEA-EQUIPMENT-IPDSLAM
OID (symbolic): PEA-EQUIPMENT-IPDSLAM::multilinkMode
OID (numeric): 1.3.6.1.4.1.193.72.300.1.1.15.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This defines the mode the multiple network-side links operate in.
singleLink(1) - only one link is used for active data transfer. This is the only possible value for devices with a single network-side link.
linkAggregation(2) - the multiple links are used as one trunk aggregating the traffic.
redundantConfiguration(3) - only one of the the multiple links is used for active data transfer, but the other are kept stand by for resilience (uses RSTP protocol).
Note: the read value may not match the actual mode during switch over.
What is multilinkMode?
Selects how the DSLAM's multiple network-side uplinks work together: singleLink(1) uses only one link at a time (the only option on single-uplink hardware), linkAggregation(2) bonds the links into one trunk, and redundantConfiguration(3) keeps one link active under RSTP with the others on standby for resilience; the reported value may briefly lag the real mode during an actual switchover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.1 snmpwalk -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.1.1 snmpget -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.1.1.15.1.1 i <value>
Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::multilinkMode OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.1 | peaEquipmentIpDslam | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1 | peaEquipmentIpDslamObjects | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1.15 | multilink | PEA-EQUIPMENT-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.1.1.15.1 | multilinkMode | PEA-EQUIPMENT-IPDSLAM |