PEA-EQUIPMENT-IPDSLAM :: multilinkForceManagementToUsePreferredInterface

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PEA-EQUIPMENT-IPDSLAM › multilinkForceManagementToUsePreferredInterface

multilinkForceManagementToUsePreferredInterface

Module: PEA-EQUIPMENT-IPDSLAM

OID (symbolic): PEA-EQUIPMENT-IPDSLAM::multilinkForceManagementToUsePreferredInterface

OID (numeric): 1.3.6.1.4.1.193.72.300.1.1.15.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this value to 'enabled (1)' forces the management traffic to be sent on the interface towards the Active ECN thereby overruling the RSTP protocol for management traffic towards this node. This enables the node controller to stay in contact with the DSLAM, even if the link is switched to the other interface by RSTP.

What is multilinkForceManagementToUsePreferredInterface?

Setting this to enabled(1) forces management traffic onto the interface toward the active ECN regardless of which link RSTP has chosen for subscriber data, so a node controller can keep talking to the DSLAM even after RSTP fails traffic over to the other uplink.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.4
snmpwalk -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkForceManagementToUsePreferredInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.1.1.15.4.1
snmpget -v2c -c public <target> PEA-EQUIPMENT-IPDSLAM::multilinkForceManagementToUsePreferredInterface.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.1.1.15.4.1 i <value>

Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::multilinkForceManagementToUsePreferredInterface OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.72diaxMIBDXD-SMI
1.3.6.1.4.1.193.72.300peaIpDslamDIESEL-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.72.300.1peaEquipmentIpDslamPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1peaEquipmentIpDslamObjectsPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1.15multilinkPEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.1.15.4multilinkForceManagementToUsePreferredInterfacePEA-EQUIPMENT-IPDSLAM