All MIBs › PEA-EQUIPMENT-IPDSLAM › configurationFileError

configurationFileError

OID (symbolic): PEA-EQUIPMENT-IPDSLAM::configurationFileError

OID (numeric): 1.3.6.1.4.1.193.72.300.1.2.0.7

Node type: NOTIFICATION-TYPE

Description: The configuration file which the device is using failed to pass or load.

Corrective Actions: - Check that the device can reach the server where the configuration file is located. - Check that the configuration is physically located on the server. - Check that the configuration file does not contain any syntax errors.

Deprecated from: EDA 1.1 R2A

Parameters 1: Managed object class IPDSLAM 2: Managed object ID [MAC] 3: Sequence number [Alarm sequence number] 4: Perceived severity Critical 5: Event time [Timestamp is retrieved from a SNTP server] 6: Event type ProcessingErrorAlarm 7: Probable cause FileError 8: Error code [Additional error information]

Ceasing OID: 1.3.6.1.4.1.193.72.300.1.2.0.8 # restartAlarm

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' PEA-EQUIPMENT-IPDSLAM::configurationFileError
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.193.72.300.1.2.0.7

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:57246->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (82184606) 9 days, 12:17:26.06
  SNMPv2-MIB::snmpTrapOID.0 = OID: PEA-EQUIPMENT-IPDSLAM::configurationFileError

Start monitoring Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-IPDSLAM::configurationFileError OID value, configure state conditions and alerts, and monitor any Ericsson (Torrent/Diax) IP DSLAM chassis, broadband DSL access multiplexer (equipment/control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.193	ericsson	ANS-COMMON-MIB
1.3.6.1.4.1.193.72	diaxMIB	DXD-SMI
1.3.6.1.4.1.193.72.300	peaIpDslam	DIESEL-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.193.72.300.1	peaEquipmentIpDslam	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2	peaEquipmentIpDslamTraps	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2.0	traps	PEA-EQUIPMENT-IPDSLAM
1.3.6.1.4.1.193.72.300.1.2.0.7	configurationFileError	PEA-EQUIPMENT-IPDSLAM

PEA-EQUIPMENT-IPDSLAM :: configurationFileError

configurationFileError

Module

This MIB depends on