All MIBs › PEA-EQUIPMENT-FELX › ifBandwidthUsageThresholdNotification

ifBandwidthUsageThresholdNotification

OID (symbolic): PEA-EQUIPMENT-FELX::ifBandwidthUsageThresholdNotification

OID (numeric): 1.3.6.1.4.1.193.72.800.10.4.0.1

Node type: NOTIFICATION-TYPE

Description: The bandwidth threshold function is used to monitor the average bandwidth over the ifBandwidthMeasurementPeriod on each of the device's external interfaces. If the measured average bandwidth (in percents to the maximum possible bandwidth on this particular interface) reaches the ifBandwidthUsageThreshold (given also in percents), the ifBandwidthUsageThresholdNotification is sent. Likewise, when the next measurement period with the average bandwidth lower than the ifBandwidthUsageThreshold is encountered, the ifBandwidthUsageThresholdCeasingNotification is sent.

This notification is sent when the measured average bandwidth on a particular interface has reached the ifBandwidthUsageThreshold.

The 'direction' variable shows which counter has triggered the notification: 'in' - incoming traffic counter, 'out' - outgoing traffic counter.

Corrective Actions: - None.

Valid from: EDA 1.3 R2A

Parameters 1: Managed object class ESN108 2: Managed object ID [MAC + PortNo] 3: Sequence number [Alarm sequence number] 4: Perceived severity Warning 5: Event time [Timestamp is retrieved from an SNTP server] 6: Event type QOS 7: Probable cause Other 8: Direction Mask [Direction of traffic (incoming or outgoing) which triggered the alarm]

Ceasing OID: 1.3.6.1.4.1.193.72.600.1.2.0.7 # restartAlarm Ceasing OID: 1.3.6.1.4.1.193.72.800.10.4.0.2 # ifBandwidthUsageThresholdCeasingNotification

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' PEA-EQUIPMENT-FELX::ifBandwidthUsageThresholdNotification
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.193.72.800.10.4.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:59515->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (439428219) 50 days, 20:38:02.19
  SNMPv2-MIB::snmpTrapOID.0 = OID: PEA-EQUIPMENT-FELX::ifBandwidthUsageThresholdNotification

Start monitoring Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-FELX::ifBandwidthUsageThresholdNotification OID value, configure state conditions and alerts, and monitor any Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.193	ericsson	ANS-COMMON-MIB
1.3.6.1.4.1.193.72	diaxMIB	DXD-SMI
1.3.6.1.4.1.193.72.800	peaFelx	PEA-FELX-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.193.72.800.10	peaEquipmentFelx	PEA-EQUIPMENT-FELX
1.3.6.1.4.1.193.72.800.10.4	ifNotifications	PEA-EQUIPMENT-FELX
1.3.6.1.4.1.193.72.800.10.4.0	ifNotificationTypes	PEA-EQUIPMENT-FELX
1.3.6.1.4.1.193.72.800.10.4.0.1	ifBandwidthUsageThresholdNotification	PEA-EQUIPMENT-FELX

PEA-EQUIPMENT-FELX :: ifBandwidthUsageThresholdNotification

ifBandwidthUsageThresholdNotification

Module

This MIB depends on