All MIBs › PEA-EQUIPMENT-FELX › ifBandwidthUsageThreshold
ifBandwidthUsageThreshold
Module: PEA-EQUIPMENT-FELX
OID (symbolic): PEA-EQUIPMENT-FELX::ifBandwidthUsageThreshold
OID (numeric): 1.3.6.1.4.1.193.72.800.10.3.3
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: The bandwidth threshold function is used to monitor the average bandwidth over the ifBandwidthMeasurementPeriod on each of the device's external interfaces. If the measured average bandwidth (in percents to the maximum possible bandwidth on this particular interface) reaches the ifBandwidthUsageThreshold (given also in percents), the ifBandwidthUsageThresholdNotification is sent. Likewise, when the next measurement period with the average bandwidth lower than the ifBandwidthUsageThreshold is encountered, the ifBandwidthUsageThresholdCeasingNotification is sent.
This defines the threshold value for the bandwidth threshold function. The value is given in percents and can lie between 1 and 99 (inclusive).
Setting this to a value different from the current value results in all the active threshold notifications being revised. The measurement counters are not cleared.
What is ifBandwidthUsageThreshold?
Sets the average-bandwidth-utilization percentage (1-99) that, once reached over the ifBandwidthMeasurementPeriod on an interface, triggers an ifBandwidthUsageThresholdNotification; changing the value re-evaluates active threshold alarms without clearing the measurement counters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.800.10.3.3 snmpwalk -v2c -c public <target> PEA-EQUIPMENT-FELX::ifBandwidthUsageThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.800.10.3.3.1 snmpget -v2c -c public <target> PEA-EQUIPMENT-FELX::ifBandwidthUsageThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.800.10.3.3.1 i <value>
Start monitoring Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-FELX::ifBandwidthUsageThreshold OID value, configure state conditions and alerts, and monitor any Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.800 | peaFelx | PEA-FELX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.800.10 | peaEquipmentFelx | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.3 | ifObjects | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.3.3 | ifBandwidthUsageThreshold | PEA-EQUIPMENT-FELX |