All MIBs › PEA-EQUIPMENT-FELX › dot3PhyMode
dot3PhyMode
Module: PEA-EQUIPMENT-FELX
OID (symbolic): PEA-EQUIPMENT-FELX::dot3PhyMode
OID (numeric): 1.3.6.1.4.1.193.72.800.10.11.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This describes the duplex mode and speed for each port. This is an extension to RFC2665 where the duplex status and interface speed can be modifed for each port. For ports 1-8, allowed values are autoNeg, halfDuplex10, halfDuplex100, fullDuplex10, fullDuplex100. Setting is not allowed for port 9. It can be only read. For port 9, the value retuned indicates the type of SFP module inserted. If no SFP module is inserted, invalid(0) is returned. If 100Mbps SFP module is inserted, fullDuplex100(5) is returned. If 1000Mbs SFP module is inserted, fullDuplex1000(6) is returned.
What is dot3PhyMode?
Sets the duplex mode and speed for a specific switch port (an extension to RFC 2665); ports 1-8 accept autoNeg, halfDuplex10/100, or fullDuplex10/100, while port 9 is read-only and instead reports the type of SFP module inserted, e.g. fullDuplex1000 for a 1000 Mbps SFP, or invalid if none is inserted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.800.10.11.1.1.2 snmpwalk -v2c -c public <target> PEA-EQUIPMENT-FELX::dot3PhyMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.800.10.11.1.1.2.1 snmpget -v2c -c public <target> PEA-EQUIPMENT-FELX::dot3PhyMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.800.10.11.1.1.2.1 i <value>
Start monitoring Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT-FELX::dot3PhyMode OID value, configure state conditions and alerts, and monitor any Ericsson Diax FELX Ethernet switch card, IP DSLAM equipment module (hardware inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.800 | peaFelx | PEA-FELX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.800.10 | peaEquipmentFelx | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.11 | dot3Objects | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.11.1 | dot3PhyModeTable | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.11.1.1 | dot3PhyModeEntry | PEA-EQUIPMENT-FELX |
| 1.3.6.1.4.1.193.72.800.10.11.1.1.2 | dot3PhyMode | PEA-EQUIPMENT-FELX |