All MIBs › PEA-BRIDGE-IPDSLAM › peakCellRate
peakCellRate
Module: PEA-BRIDGE-IPDSLAM
OID (symbolic): PEA-BRIDGE-IPDSLAM::peakCellRate
OID (numeric): 1.3.6.1.4.1.193.72.300.30.1.3.1.17
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
The peak downstream PVC rate. The rate has to be lower or equal to the configured ADSL rate and in steps of 32000 bps. Notice: To carry telephony over IP, 192000 bps is needed and the ADSL line must be configured to at least 192000. (the upstream must also be configured to 192000 for full duplex).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.30.1.3.1.17 snmpwalk -v2c -c public <target> PEA-BRIDGE-IPDSLAM::peakCellRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.30.1.3.1.17.1 snmpget -v2c -c public <target> PEA-BRIDGE-IPDSLAM::peakCellRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.30.1.3.1.17.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> peakCellRate.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| 1.3.6.1.4.1.193.72.300.30 | peaBridgeIpDslam | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1 | bridgeControl | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.3 | pvcTable | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.3.1 | pvcEntry | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.3.1.17 | peakCellRate | PEA-BRIDGE-IPDSLAM |