All MIBs › PEA-BRIDGE-IPDSLAM › ipAclIcmpCode
ipAclIcmpCode
Module: PEA-BRIDGE-IPDSLAM
OID (symbolic): PEA-BRIDGE-IPDSLAM::ipAclIcmpCode
OID (numeric): 1.3.6.1.4.1.193.72.300.30.1.21.35.5.64
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
Value of ICMP code. In certain cases, an ICMP type may have several submessages. A submessage is called an ICMP code.
When an ICMP message requires only a type, the ICMP code will be set to 0. The default value of -1 for ipAclIcmpCode is used to match on all ICMP Codes.
The value cannot be changed while the Rule is Active.
Valid from: EDA 2.2 SP2
What is ipAclIcmpCode?
This object specifies which ICMP message code (such as 'echo reply', 'destination unreachable', or a specific sub-type) to match in an IP Access Control List rule. ICMP messages have both a type and a code; this object filters on the code level for finer granularity. An operator configures this when building ICMP-specific firewall or traffic control policies, such as allowing only specific ICMP diagnostic messages.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| 1.3.6.1.4.1.193.72.300.30 | peaBridgeIpDslam | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1 | bridgeControl | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.21 | accessControlList | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.21.35 | ipAclRuleTable | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.21.35.5 | ipAclRuleEntry | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.21.35.5.64 | ipAclIcmpCode | PEA-BRIDGE-IPDSLAM |