All MIBs › PEA-BB-SELT › bbSeltTestType
bbSeltTestType
Module: PEA-BB-SELT
OID (symbolic): PEA-BB-SELT::bbSeltTestType
OID (numeric): 1.3.6.1.4.1.193.72.602.10.5.1.1.3
Node type: OBJECT-TYPE
Type: AutonomousType
Access: read-write
Description: A control variable used to start and stop operator- initiated line tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of line. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated.
When read, this object always returns the most recent value that bbSeltTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
What is bbSeltTestType?
The control object used to start or abort a SELT line test: writing a specific test's OID starts it (only when no test is currently running), while writing the special noTest value aborts a test already in progress. Reading it always returns the most recently requested test, or noTest if none has been set since the agent last restarted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.602.10.5.1.1.3 snmpwalk -v2c -c public <target> PEA-BB-SELT::bbSeltTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.602.10.5.1.1.3.1 snmpget -v2c -c public <target> PEA-BB-SELT::bbSeltTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.602.10.5.1.1.3.1 s <value>
Start monitoring Ericsson IP DSLAM, DSL access equipment (Single-Ended Line Test diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-BB-SELT::bbSeltTestType OID value, configure state conditions and alerts, and monitor any Ericsson IP DSLAM, DSL access equipment (Single-Ended Line Test diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.602 | peaLineTest | PEA-LINE-TEST-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.602.10 | bbSelt | PEA-BB-SELT |
| 1.3.6.1.4.1.193.72.602.10.5 | bbSeltTestGroup | PEA-BB-SELT |
| 1.3.6.1.4.1.193.72.602.10.5.1 | bbSeltTestTable | PEA-BB-SELT |
| 1.3.6.1.4.1.193.72.602.10.5.1.1 | bbSeltTestEntry | PEA-BB-SELT |
| 1.3.6.1.4.1.193.72.602.10.5.1.1.3 | bbSeltTestType | PEA-BB-SELT |