All MIBs › PDN-SECURITY-MIB › devSecurityMgrIpAddress
devSecurityMgrIpAddress
Module: PDN-SECURITY-MIB
OID (symbolic): PDN-SECURITY-MIB::devSecurityMgrIpAddress
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.8.4.1.1
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This is used to specify the IP address that identifies the SNMP manager(s) that are authorized to send SNMP messages.
An existing Security Manager may be deleted by setting the devSecurityMgrIpAddress object to 0.0.0.0 or by setting the devSecurityMgrIpAddress object to a new IP Address. A new Security Manager may be added by setting the devSecurityMgrIpAddress object of 0.0.0.0 to the new address as long as there is still room for another Security Manager.
When ever a new Security Manager is added or an existing Security Manager's IP Address is modified, the devSecurityMgrAccess object is set to the default value of read (1).
What is devSecurityMgrIpAddress?
This object, in the deprecated devSecurityMgrTable, specifies the IP address of an SNMP manager authorized to send SNMP messages; setting it to 0.0.0.0 deletes the entry, and creating a new entry resets its access to the default of read(1). Admins used this to add or remove authorized SNMP manager addresses on the legacy security manager table before it was replaced. Setting this to 10.1.1.5 would authorize that address as an SNMP manager, defaulting its access to read(1) until explicitly changed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.8.4.1.1 snmpwalk -v2c -c public <target> PDN-SECURITY-MIB::devSecurityMgrIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.8.4.1.1.1 snmpget -v2c -c public <target> PDN-SECURITY-MIB::devSecurityMgrIpAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.8.4.1.1.1 a <value>
Start monitoring Paradyne DSL access multiplexer/network access device (management-plane access control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-SECURITY-MIB::devSecurityMgrIpAddress OID value, configure state conditions and alerts, and monitor any Paradyne DSL access multiplexer/network access device (management-plane access control) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.8.4 | devSecurityMgrTable | PDN-SECURITY-MIB |
| 1.3.6.1.4.1.1795.2.24.2.8.4.1 | devSecurityMgrEntry | PDN-SECURITY-MIB |
| 1.3.6.1.4.1.1795.2.24.2.8.4.1.1 | devSecurityMgrIpAddress | PDN-SECURITY-MIB |