PDN-PPP-BRIDGE-NCP-EXT-MIB :: pdnPppBridgeRemoteToLocal802Tagged

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-PPP-BRIDGE-NCP-EXT-MIB › pdnPppBridgeRemoteToLocal802Tagged

pdnPppBridgeRemoteToLocal802Tagged

Module: PDN-PPP-BRIDGE-NCP-EXT-MIB

OID (symbolic): PDN-PPP-BRIDGE-NCP-EXT-MIB::pdnPppBridgeRemoteToLocal802Tagged

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.29.1.1.1.3

Node type: OBJECT-TYPE

Type: SwitchState

Access: read-only

Description: Indicates whether or not the remote PPP entity is transmitting IEEE 802 tagged frames. An enabled(1) indicates that frames will be transmitted 802 tagged. A disabled(2) indicate that frames will not be transmitted 802 tagged.

What is pdnPppBridgeRemoteToLocal802Tagged?

This reports whether the remote end of this PPP bridge link is transmitting Ethernet frames with IEEE 802 VLAN tags intact, in the remote-to-local direction, as negotiated per RFC 3518. Administrators use it to verify VLAN tagging behavior coming from the far end of the link, complementing the local-to-remote status object, so they can confirm both directions are handling tags consistently. If this value reads disabled while the local-to-remote value reads enabled, an admin would recognize an asymmetric tagging configuration that could cause VLAN traffic to lose its tag information in one direction.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.29.1.1.1.3
snmpwalk -v2c -c public <target> PDN-PPP-BRIDGE-NCP-EXT-MIB::pdnPppBridgeRemoteToLocal802Tagged

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.29.1.1.1.3.1
snmpget -v2c -c public <target> PDN-PPP-BRIDGE-NCP-EXT-MIB::pdnPppBridgeRemoteToLocal802Tagged.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pdnPppBridgeRemoteToLocal802Tagged.1

Start monitoring Paradyne Networks access equipment, DSL access concentrator using PPP bridging (Bridge Control Protocol extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-PPP-BRIDGE-NCP-EXT-MIB::pdnPppBridgeRemoteToLocal802Tagged OID value, configure state conditions and alerts, and monitor any Paradyne Networks access equipment, DSL access concentrator using PPP bridging (Bridge Control Protocol extensions) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.29pdnPppBridgeExtMIBPDN-PPP-BRIDGE-NCP-EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.29.1pdnPppBridgeExtObjectsPDN-PPP-BRIDGE-NCP-EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.29.1.1pdnPppBridgeExtTablePDN-PPP-BRIDGE-NCP-EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.29.1.1.1pdnPppBridgeExtEntryPDN-PPP-BRIDGE-NCP-EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.29.1.1.1.3pdnPppBridgeRemoteToLocal802TaggedPDN-PPP-BRIDGE-NCP-EXT-MIB