All MIBs › PDN-MPE-DEVICE-CONTROL-MIB › mpeDevControlReset
mpeDevControlReset
Module: PDN-MPE-DEVICE-CONTROL-MIB
OID (symbolic): PDN-MPE-DEVICE-CONTROL-MIB::mpeDevControlReset
OID (numeric): 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1
Node type: OBJECT-TYPE
Type: ResetStates
Access: read-create
Description: Writing the value reset (2) to this object initiates a Hardware power-on reset of the device. Writing the value resetToFactoryDefaults (3) causes the device to re-configure itself with factory defaults. Writing the value (4) causes the device to re-configure itself with a previously loaded active configuration. The value read from this object is noOp(1).
What is mpeDevControlReset?
Write reset(2) to power-cycle this device, resetToFactoryDefaults(3) to wipe its config back to factory settings, or (4) to reload its previously saved active configuration; a read always returns noOp(1).
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.12 | pdn_mpe | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.12.10 | mpeDevControl | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1 | mpeDevControlMIBObjects | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1 | mpeDevHwControl | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1 | mpeDevControlTable | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1 | mpeDevControlEntry | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1 | mpeDevControlReset | PDN-MPE-DEVICE-CONTROL-MIB |