All MIBs › PDN-MPE-DEVICE-CONTROL-MIB › mpeDevControlExtendedSelfTest
mpeDevControlExtendedSelfTest
Module: PDN-MPE-DEVICE-CONTROL-MIB
OID (symbolic): PDN-MPE-DEVICE-CONTROL-MIB::mpeDevControlExtendedSelfTest
OID (numeric): 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to start the extended Power-On Self-Test test. Writing the value enableExtendSelfTestAndReset(2) to this object resets the device and puts it into extended Power-On Self-Test mode. During device initialization, the extended Self-Test would be carried out first and then the device would carry out its normal boot operation. The value read from this object is noOp(1). Writing back the same value, noOp(1) will not start the test. Note that if extended Self-Test fails for some reason, after re-initialization, the value of this object will default to enableExtendSelfTestAndReset(2) again unless the manager explicitly chooses not to do so.
What is mpeDevControlExtendedSelfTest?
Write enableExtendSelfTestAndReset(2) to reset the device and run an extended power-on self-test before its normal boot; reads always show noOp(1), and if the extended test fails the device re-arms itself to run it again on the next boot unless told otherwise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1 snmpwalk -v2c -c public <target> PDN-MPE-DEVICE-CONTROL-MIB::mpeDevControlExtendedSelfTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1.1 snmpget -v2c -c public <target> PDN-MPE-DEVICE-CONTROL-MIB::mpeDevControlExtendedSelfTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1.1 i <value>
Start monitoring Paradyne Networks DSLAM, MPE module (device reset/self-test/firmware control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-MPE-DEVICE-CONTROL-MIB::mpeDevControlExtendedSelfTest OID value, configure state conditions and alerts, and monitor any Paradyne Networks DSLAM, MPE module (device reset/self-test/firmware control) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.12 | pdn_mpe | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.12.10 | mpeDevControl | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1 | mpeDevControlMIBObjects | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1 | mpeDevHwControl | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2 | mpeDevControlSelfTestTable | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1 | mpeDevControlSelfTestEntry | PDN-MPE-DEVICE-CONTROL-MIB |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1 | mpeDevControlExtendedSelfTest | PDN-MPE-DEVICE-CONTROL-MIB |