All MIBs › PDN-MPD-EXT-MIB › pdnMpdExtSecurityModeConfig
pdnMpdExtSecurityModeConfig
Module: PDN-MPD-EXT-MIB
OID (symbolic): PDN-MPD-EXT-MIB::pdnMpdExtSecurityModeConfig
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.44.1.1.1
Node type: OBJECT-TYPE
Type: PdnMpdExtSecurityMode
Access: read-write
Description: This object is used to configure the level of SNMP access that the agent supports. That is, which combinations of Model Processing can be dispatched and what security levels are supported for those models.
An agent can choose to support more than a single combination of modes, (e.g., SNMPv1 and SNMPv2 with noAuthNoPriv) or choose to support a single option (e.g., a very secured agent with only SNMPv3 with authentication and privacy enabled.). Even some of these combinations may not be supported at all.
Setting this object to a valid value will cause the entries associated with those Models and SecurityLevels being changed to become active/inactive in tables processed by the SNMPv3 Framework.
What is pdnMpdExtSecurityModeConfig?
This object configures which combination of SNMP protocol versions and security levels (for example SNMPv1/v2 with no authentication, or SNMPv3 with authentication and encryption) the agent is allowed to accept for management requests. An administrator sets it to control how strict SNMP access is, ranging from wide-open legacy compatibility to a fully authenticated, encrypted-only posture, and changing it activates or deactivates the matching entries in the SNMPv3 framework's tables. For example, setting this to only allow SNMPv3 with authentication and privacy would cause the device to stop accepting plaintext SNMPv1 community-string requests.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.44.1.1.1 snmpwalk -v2c -c public <target> PDN-MPD-EXT-MIB::pdnMpdExtSecurityModeConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.44.1.1.1.1 snmpget -v2c -c public <target> PDN-MPD-EXT-MIB::pdnMpdExtSecurityModeConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.44.1.1.1.1 s <value>
Start monitoring Paradyne devices running SNMPv3 (Message Processing Dispatcher security mode) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-MPD-EXT-MIB::pdnMpdExtSecurityModeConfig OID value, configure state conditions and alerts, and monitor any Paradyne devices running SNMPv3 (Message Processing Dispatcher security mode) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.44 | pdnMpdExt | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.44.1 | pdnMpdExtMIB | PDN-MPD-EXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.44.1.1 | pdnMpdExtMIBObjects | PDN-MPD-EXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.44.1.1.1 | pdnMpdExtSecurityModeConfig | PDN-MPD-EXT-MIB |