All MIBs › PDN-CROSSCONNECT-MIB › devDs1FracIfIndex
devDs1FracIfIndex
Module: PDN-CROSSCONNECT-MIB
OID (symbolic): PDN-CROSSCONNECT-MIB::devDs1FracIfIndex
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.7.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: An index value that uniquely identifies the interface to which this entry is mapped. The interface identified by a particular value of this index is the same interface as identified by the same value of an ifIndex object instance in the Interfaces table of MIB II (RFC 1213). If no interface is currently using the channel identified by devDs1FracNumber, then this value should be zero. If a single interface occupies more than one time slot, then its ifIndex value is found in multiple time slots (i.e., there are multiple entries in table with the same devDs1FracIfIndex value).
What is devDs1FracIfIndex?
This read-write value identifies the interface, using the same ifIndex convention as MIB-II, to which a specific DS0 channel is currently mapped; a value of zero means no interface is using that channel, and a single interface spanning multiple timeslots appears in multiple rows sharing this same value. Admins set it to cross-connect a specific DS0 channel to a synchronous data port or voice port interface. An admin assigning DS0 channels 1-4 to synchronous data port interface 5 would set this to ifIndex 5 across those four channel rows.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.7.1.1.3 snmpwalk -v2c -c public <target> PDN-CROSSCONNECT-MIB::devDs1FracIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.7.1.1.3.1 snmpget -v2c -c public <target> PDN-CROSSCONNECT-MIB::devDs1FracIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.7.1.1.3.1 i <value>
Start monitoring Paradyne xDSL access multiplexers/DSU-CSU equipment (cross-connect fabric mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-CROSSCONNECT-MIB::devDs1FracIfIndex OID value, configure state conditions and alerts, and monitor any Paradyne xDSL access multiplexers/DSU-CSU equipment (cross-connect fabric mapping) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.7 | crossConnect | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.7.1 | devDs1FracTable | PDN-CROSSCONNECT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.7.1.1 | devDs1FracEntry | PDN-CROSSCONNECT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.7.1.1.3 | devDs1FracIfIndex | PDN-CROSSCONNECT-MIB |