PCUBE-SE-MIB :: tpCpuUtilizationPeak

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PCUBE-SE-MIB › tpCpuUtilizationPeak

tpCpuUtilizationPeak

Module: PCUBE-SE-MIB

OID (symbolic): PCUBE-SE-MIB::tpCpuUtilizationPeak

OID (numeric): 1.3.6.1.4.1.5655.4.1.9.1.1.36

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Indicates the peak value of tpCpuUtilization since the last time it was cleared or the system started.

What is tpCpuUtilizationPeak?

The highest CPU utilization percentage this traffic processor has recorded since counters were last cleared or the system started. An admin uses this peak to know the worst-case CPU load the processor has actually experienced, even if current utilization looks fine.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.9.1.1.36
snmpwalk -v2c -c public <target> PCUBE-SE-MIB::tpCpuUtilizationPeak

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.9.1.1.36.1
snmpget -v2c -c public <target> PCUBE-SE-MIB::tpCpuUtilizationPeak.1

Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::tpCpuUtilizationPeak OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5655pcubePCUBE-SMI
1.3.6.1.4.1.5655.4pcubeWorkgroupPCUBE-SMI
Numeric OIDNameModule
1.3.6.1.4.1.5655.4.1pcubeSEObjsPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.9trafficProcessorGrpPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.9.1tpInfoTablePCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.9.1.1tpInfoEntryPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.9.1.1.36tpCpuUtilizationPeakPCUBE-SE-MIB