All MIBs › PCUBE-SE-MIB › pportOperDuplex
pportOperDuplex
Module: PCUBE-SE-MIB
OID (symbolic): PCUBE-SE-MIB::pportOperDuplex
OID (numeric): 1.3.6.1.4.1.5655.4.1.10.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates whether the port is operating in half-duplex or full-duplex.
What is pportOperDuplex?
The duplex mode (half or full) the port is actually operating in right now. An admin compares this against pportAdminDuplex to confirm the port actually negotiated the expected duplex, rather than falling back to a mismatched mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.8 snmpwalk -v2c -c public <target> PCUBE-SE-MIB::pportOperDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.8.1 snmpget -v2c -c public <target> PCUBE-SE-MIB::pportOperDuplex.1
Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::pportOperDuplex OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5655 | pcube | PCUBE-SMI |
| 1.3.6.1.4.1.5655.4 | pcubeWorkgroup | PCUBE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5655.4.1 | pcubeSEObjs | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10 | pportGrp | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1 | pportTable | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1 | pportEntry | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1.8 | pportOperDuplex | PCUBE-SE-MIB |