All MIBs › PCUBE-SE-MIB › pportIfIndex
pportIfIndex
Module: PCUBE-SE-MIB
OID (symbolic): PCUBE-SE-MIB::pportIfIndex
OID (numeric): 1.3.6.1.4.1.5655.4.1.10.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The value of the instance of the ifIndex object, defined in MIB-II, for this port.
What is pportIfIndex?
The value of the corresponding ifIndex, as defined in the standard MIB-II Interfaces group, for this port. An admin uses this to cross-reference a PCUBE-SE-MIB port row with the standard ifTable/ifXTable entries (e.g. for ifOperStatus or interface counters) for the same physical port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.5 snmpwalk -v2c -c public <target> PCUBE-SE-MIB::pportIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.5.1 snmpget -v2c -c public <target> PCUBE-SE-MIB::pportIfIndex.1
Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::pportIfIndex OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5655 | pcube | PCUBE-SMI |
| 1.3.6.1.4.1.5655.4 | pcubeWorkgroup | PCUBE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5655.4.1 | pcubeSEObjs | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10 | pportGrp | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1 | pportTable | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1 | pportEntry | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1.5 | pportIfIndex | PCUBE-SE-MIB |